Command Reference Guide

User Account Commands
CLI Command Reference
September 2014 Page 77
HP Moonshot Switch Module CLI Command Reference
Line Exec Method List
--------- ---------------------
Console dfltExecAuthList
Telnet dfltExecAuthList
SSH dfltExecAuthList
enable authentication
Use this command to specify the authentication method list when accessing a higher privilege level from a
remote telnet or console.
Example: The following example specifies the default authentication method when accessing a higher
privilege level console.
(Routing)(config)# line console
(Routing)(config-line)# enable authentication default
no enable authentication
Use this command to return to the default specified by the enable authentication command.
Format
enable authentication {default | list-name}
Mode Line Config
Parameter Description
default Uses the default list created with the
aaa authentication enable command.
list-name Uses the indicated list created with the
aaa authentication enable command.
Format
no enable authentication
Mode Line Config