Command Reference Guide

CLI Command Reference
September 2014 Page 9
HP Moonshot Switch Module CLI Command Reference
About This Document
Purpose
This document describes command-line interface (CLI) commands you use to view and configure HP
Moonshot-45G Switch Module and Moonshot-180G Switch Module software. You can access the CLI by using
a direct connection to the serial port or by using Telnet or SSH over a remote network connection.
Audience
This document is for system administrators who configure and operate systems using HP Moonshot Switch
Module software. This document assumes that the reader has a basic knowledge of Ethernet and networking
concepts.
Support and Other Resources
Before you Contact HP
Be sure to have the following information available before you call HP:
• Technical support registration number (if applicable)
• Product serial number
• Product model name and number
• Product identification number
• Applicable error messages
• Add-on boards or hardware
• Third-party hardware or software
• Operating system type and revision level