Command Reference Guide

User Account Commands
CLI Command Reference
September 2014 Page 99
HP Moonshot Switch Module CLI Command Reference
show accounting methods
Use this command to display configured accounting method lists.
Example: The following shows example CLI display output for the command.
(Routing) #show accounting methods
AcctType MethodName MethodType Method1 Method2
--------- ---------------- ------------- --------- ---------
Exec dfltExecList start-stop tacacs
Commands dfltCmdList stop-only tacacs
DOT1X dfltDot1xList start-stop radius
Line EXEC Method List Command Method List
--------- -------------------- --------------------
Console none none
Telnet none none
SSH none none
clear accounting statistics
This command clears the accounting statistics.
show domain-name
This command displays the configured domain-name.
Example: The following shows how to configure and display the domain name information.
(Routing) (Config)#domain-name test.hp.com
(Routing) (Config)#domain-name enable
(Routing) (Config)#exit
(Routing) #show domain-name
User-Domain Enabled : TRUE
User-Domain Name : test.hp.com
Format
show accounting methods
Mode Privileged EXEC
Format
clear accounting statistics
Mode Privileged Exec
Format
show domain-name
Mode Privileged Exec