User's Manual

Configuring IPv4 settings
1. Select Network Configuration from the main menu.
2. Select Actions→Edit.
3. Configure the following settings in the IPv4 section:
• DHCPv4—Enables the Moonshot 1500 CM module to obtain its IP address (and many
other settings) from a DHCP server.
• IPv4 address—The Moonshot 1500 CM module IP address. If DHCP is used, this value
is supplied automatically. If DHCP is not used, enter a static IP address.
• Subnet mask—The subnet mask of the Moonshot 1500 CM module IP network. If DHCP
is used, this value is supplied automatically. If DHCP is not used, enter a subnet mask for
the network.
• Gateway—The Moonshot 1500 CM module gateway IP address. If DHCP is used, this
value is supplied automatically. If DHCP is not used, enter the a gateway IP address.
4. Click Advanced, to edit the advanced IPv4 settings.
52 Configuring Moonshot System