User's Manual

• Last Update—The date and time when the latest event of this type occurred. This value is based
on the date and time stored by the iLO CM firmware.
For information about setting the time in the iLO CM firmware, see “Editing the time settings”
(page 56).
• Initial Update—The date and time when the first event of this type occurred. This value is based
on the date and time stored by the iLO CM firmware.
If the iLO CM firmware did not recognize the date and time when the event was first created,
[NOT SET] is displayed.
• Count—The number of times this event has occurred (if supported).
In general, important events generate an event log entry each time they occur. They are not
consolidated into one event log entry.
When less important events are repeated, they are consolidated into one event log entry, and
the Count and Last Update values are updated. Each event type has a specific time interval
that determines whether repeated events are consolidated or a new event is logged.
• Description—The description identifies the component and detailed characteristics of the
recorded event.
• Location—The component or subsystem that identified the logged event.
Customizing the event log view
You can customize the list of events as follows:
• To filter by severity, select a severity level from the Severity menu.
• To filter by the Last Update date, select a date range in the Last Update menu.
60 Working with events