Command Reference Guide

104
Parameters
car-name: Specifies an aggregate CAR action by its name. This argument must start with a letter, and is
a case-sensitive string of 1 to 31 characters. If you do not specify an aggregate CAR action, this
command displays the configuration and statistics for all aggregate CAR actions.
Examples
# Display the configuration and statistics for all aggregate CAR actions.
<Sysname> display qos car name
Name: a
Mode: aggregative
CIR 12800 (kbps), CBS 800256 (Bytes), EBS 512 (Bytes)
Green action: pass
Yellow action: pass
Red action: discard
Slot 1:
Green packets: 54641 (Packets)
Red packets: 856 (Packets)
Slot 2:
Green packets: 12541 (Packets)
Red packets: 1235 (Packets)
Table 40 Command output
Field Descri
p
tion
Name Name of the aggregate CAR action.
Mode Type of the aggregate CAR action: aggregative.
CIR CBS EBS PIR Parameters for the CAR action.
Green action
Action to take on green packets:
• discard—Drops the packets.
• pass—Permits the packets to pass through.
Yellow action
Action to take on yellow packets:
• discard—Drops the packets.
• pass—Permits the packets to pass through.
Red action
Action to take on red packets:
• discard—Drops the packets.
• pass—Permits the packets to pass through.
Green packet Statistics about green packets.
Red packet Statistics about red packets.
qos car
Use qos car to configure an aggregate CAR action.
Use undo qos car to remove an aggregate CAR action.