Command Reference Guide

107
Time range commands
display time-range
Use display time-range to display time range configuration and status.
Syntax
display time-range { time-range-name | all }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
time-range-name: Specifies a time range name, a case-insensitive string of 1 to 32 characters. It must
start with an English letter.
all: Displays the configuration and status of all existing time ranges.
Examples
# Display the configuration and status of time range t4.
<Sysname> display time-range t4
Current time is 17:12:34 11/23/2010 Tuesday
Time-range : t4 (Inactive)
10:00 to 12:00 Mon
14:00 to 16:00 Wed
from 00:00 1/1/2011 to 00:00 1/1/2012
from 00:00 6/1/2011 to 00:00 7/1/2011
Table 41 Command output
Field Descri
p
tion
Current time Current system time.
Time-range
Configuration and status of the time range, including its name, status (active or
inactive), and start time and end time.
time-range
Use time-range to create or edit a time range.
Use undo time-range to delete a time range or a statement in the time range.