Command Reference Guide

112
Table 42 Mapping between configured values of ratio-value and effective values
Confi
g
ured value of ratio-value Effective value
0 to 1 1
2 to 3 3
4 to 7 6
8 to 16 11
17 to 29 20
30 to 42 33
43 to 60 50
61 to 76 67
77 to 86 80
87 to 100 89
Examples
# Configure queue 0 to use up to 5% shared-area space of cell resources in the egress buffer of IRF
member device 2.
<Sysname> system-view
[Sysname] buffer egress slot 2 cell queue 0 shared ratio 5
buffer total-shared
Use buffer total-shared to set the total shared-area ratio.
Use undo buffer total-shared to restore the default.
Syntax
buffer egress [ slot slot-number ] cell total-shared ratio ratio-value
undo buffer egress [ slot slot-number ] cell total-shared
Default
The total shared-area ratio is 84% of the buffer.
Views
System view
Predefined user roles
network-admin
Parameters
egress: Specifies the egress buffer.
slot slot-number: Specifies an IRF member device by its member ID (slot number). If you do not specify an
IRF member device, this command applies to all IRF member devices.
cell: Specifies cell resources.
ratio ratio-value: Specifies the ratio of the shared area in percentage.