Command Reference Guide

34
rule comment
Use rule comment to add a comment about an existing ACL rule or edit its comment to make the rule easy
to understand.
Use undo rule comment to delete an ACL rule comment.
Syntax
rule rule-id comment text
undo rule rule-id comment
Default
An ACL has not rule comment.
Views
IPv4/IPv6 basic ACL view
IPv4/IPv6 advanced ACL view
Ethernet frame header ACL view
User-defined ACL view
Predefined user roles
network-admin
Parameters
rule-id: Specifies an ACL rule ID in the range of 0 to 65534. The ACL rule must already exist.
text: Specifies a comment about the ACL rule, a case-sensitive string of 1 to 127 characters.
Examples
# Create a rule for IPv4 basic ACL 2000, and add a comment about the rule.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule 0 deny source 1.1.1.1 0
[Sysname-acl-basic-2000] rule 0 comment This rule is used for telnet.
Related commands
display acl
step
Use step to set a rule numbering step for an ACL.
Use undo step to restore the default.
Syntax
step step-value
undo step
Default
The rule numbering step is five.