Command Reference Guide

35
Views
IPv4/IPv6 basic ACL view
IPv4/IPv6 advanced ACL view
Ethernet frame header ACL view
Predefined user roles
network-admin
Parameters
step-value: ACL rule numbering step in the range of 1 to 20.
Usage guidelines
The rule numbering step sets the increment by which the system numbers rules automatically. For example,
the default ACL rule numbering step is 5. If you do not assign IDs to rules you are creating, they are
numbered 0, 5, 10, 15, and so on. The wider the numbering step, the more rules you can insert between
two rules. Whenever the step changes, the rules are renumbered, starting from 0. For example, if there
are five rules numbered 5, 10, 13, 15, and 20, changing the step from 5 to 2 causes the rules to be
renumbered 0, 2, 4, 6, and 8.
Examples
# Set the rule numbering step to 2 for IPv4 basic ACL 2000.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] step 2
Related commands
display acl