Command Reference Guide

[Sysname-classifier-class1] if-match acl 3101

# Define a match criterion for traffic class class1 to match the ACL named flow.

<Sysname> system-view

[Sysname] traffic classifier class1

[Sysname-classifier-class1] if-match acl name flow

# Define a match criterion for traffic class class1 to match the advanced IPv6 ACL 3101.

<Sysname> system-view

[Sysname] traffic classifier class1

[Sysname-classifier-class1] if-match acl ipv6 3101

# Define a match criterion for traffic class class1 to match the IPv6 ACL named flow.

<Sysname> system-view

[Sysname] traffic classifier class1

[Sysname-classifier-class1] if-match acl ipv6 name flow

# Define a match criterion for traffic class class1 to match all packets.

<Sysname> system-view

[Sysname] traffic classifier class1

[Sysname-classifier-class1] if-match any

# Define a match criterion for traffic class class1 to match the packets with their DSCP values being 1, 6,

or 9.

<Sysname> system-view

[Sysname] traffic classifier class1 operator or

[Sysname-classifier-class1] if-match dscp 1

[Sysname-classifier-class1] if-match dscp 6

[Sysname-classifier-class1] if-match dscp 9

# Define a match criterion for traffic class class1 to match the packets with their IP precedence values

being 1 or 6.

<Sysname> system-view

[Sysname] traffic classifier class1 operator or

[Sysname-classifier-class1] if-match ip-precedence 1

[Sysname-classifier-class1] if-match ip-precedence 6

# Define a match criterion for traffic class class1 to match IP packets.

<Sysname> system-view

[Sysname] traffic classifier class1

[Sysname-classifier-class1] if-match protocol ip

# Define a match criterion for traffic class class1 to match double-tagged packets with VLAN ID 1, 6, or

9 in inner VLAN tags.

<Sysname> system-view

[Sysname] traffic classifier class1

[Sysname-classifier-class1] if-match customer-vlan-id 1 6 9

# Define a match criterion for traffic class class1 to match the packets with VLAN ID 2, 7, or 10 in outer

VLAN tags.

<Sysname> system-view

[Sysname] traffic classifier class1

[Sysname-classifier-class1] if-match service-vlan-id 2 7 10

# Define a match criterion for traffic class class1 to match the packets with a local QoS ID of 3.