Command Reference Guide

54
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark local-precedence 2
remark qos-local-id
Use remark qos-local-id to configure a local QoS ID marking action in a traffic behavior.
Use undo remark qos-local-id to delete the action.
Syntax
remark qos-local-id local-id-value
undo remark qos-local-id
Default
No local QoS ID marking action is configured.
Views
Traffic behavior view
Predefined user roles
network-admin
Parameters
local-id-value: Specifies the local QoS ID to be marked for packets. The value range for this argument is
1 to 4095. The switch supports local QoS IDs in the range of 1 to 3999.
Usage guidelines
Remarking local QoS IDs combines different traffic classes into one new class, which is indicated by a
local QoS ID. You can configure a traffic behavior for this new class to implement two levels of actions
on a traffic class.
Remarking local QoS IDs applies only to the incoming traffic.
Examples
# Configure the action of marking packet with local QoS ID 2.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark qos-local-id 2
remark service-vlan-id
Use remark service-vlan-id to configure an SVLAN marking action in a traffic behavior.
Use undo remark service-vlan-id to delete the action.
Syntax
remark service-vlan-id vlan-id
undo remark service-vlan-id
Default
No SVLAN marking action is configured.