Command Reference Guide

58
<Sysname> display qos policy user-defined
User-defined QoS policy information:
Policy: 1 (ID 100)
Classifier: 1 (ID 100)
Behavior: 1
Marking:
Remark dscp 3
Committed Access Rate:
CIR 128 (kbps), CBS 8192 (Bytes), EBS 512 (Bytes)
Green action : pass
Yellow action : pass
Red action : discard
Classifier: 2 (ID 101)
Behavior: 2
Accounting enable: Packet
Filter enable: Permit
Marking:
Remark dot1p 4
Classifier: 3 (ID 102)
Behavior: 3
-none-
display qos policy control-plane
Use display qos policy control-plane to display the QoS policy applied to a control plane.
Syntax
display qos policy control-plane slot slot-number
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its member ID (slot number).
Examples
# Display the QoS policy applied to the control plane of IRF member device 1.
<Sysname> display qos policy control-plane slot 1
Control plane
Direction: Inbound