Command Reference Guide

62
CIR 128 (kbps), CBS 8192 (Bytes), EBS 512 (Bytes)
Green action : pass
Yellow action : pass
Red action : discard
Green packets : 0 (Packets)
Red packets : 0 (Packets)
Classifier: 2
Operator: AND
Rule(s) :
If-match protocol ipv6
Behavior: 2
Accounting enable:
0 (Packets)
Filter enable: Permit
Marking:
Remark dot1p 4
Table 23 Command output
Field Descri
p
tion
Direction Direction (inbound or outbound ) in which the QoS policy is applied.
Green packets Statistics about green packets.
Red packets Statistics about red packets.
For the description of other fields, see Table 16 and Table 19.
display qos policy interface
Use display qos policy interface to display QoS policies applied to interfaces.
Syntax
display qos policy interface [ interface-type interface-number ] [ inbound | outbound ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number.
inbound: Displays QoS policies applied to incoming traffic.
outbound: Displays QoS policies applied to outgoing traffic.
Usage guidelines
If you do not specify a direction, this command displays QoS policies applied to incoming traffic and
QoS policies applied to outgoing traffic.