Command Reference Guide

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

name policy-name: Specifies a QoS policy by its name, a case-sensitive string of 1 to 31 characters.

vlan vlan-id: Specifies a VLAN by its ID.

inbound: Displays QoS policies applied to incoming traffic.

outbound: Displays QoS policies applied to outgoing traffic.

slot slot-number: Specifies an IRF member device by its member ID (slot number). If you do not specify an

IRF member device, this command displays QoS policies applied to VLANs on the master device.

Usage guidelines

If you do not specify a direction, this command displays QoS policies applied to VLANs in both inbound

and outbound directions.

Examples

# Display QoS policies applied to VLAN 2.

<Sysname> display qos vlan-policy vlan 2

Vlan 2

Direction: Outbound

Policy: 1

Classifier: 1

Operator: AND

Rule(s) : If-match acl 2000

Behavior: 1

Marking:

Remark dscp 3

Committed Access Rate:

CIR 128 (kbps), CBS 8192 (Bytes), EBS 512 (Bytes)

Green action: pass

Yellow action: pass

Red action: discard

Green packets: 0(Packets)

Red packets: 0(Packets)

Classifier: 2

Operator: AND

Rule(s) : If-match protocol ipv6

Behavior: 2

Accounting enable:

0 (Packets)

Filter enable: Permit

Marking: