Command Reference Guide

74
Examples
# Set the port priority of FortyGigE 1/1/1 to 2.
<Sysname> system-view
[Sysname] interface FortyGigE 1/1/1
[Sysname-FortyGigE1/1/1] qos priority 2
Related commands
display qos trust interface
Priority trust mode commands
display qos trust interface
Use display qos trust interface to display priority trust mode and port priority information on an interface.
Syntax
display qos trust interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify an
interface, this command displays priority trust mode and port priority information of all interfaces.
Examples
# Display the priority trust mode and port priority information of FortyGigE 1/1/1.
<Sysname> display qos trust interface FortyGigE 1/1/1
Interface: FortyGigE1/1/1
Port priority information
Port priority: 0
Port priority trust type: none
Table 28 Command output
Field Descri
p
tion
Interface Interface type and interface number.
Port priority Port priority set for the interface.
Port priority trust type
Priority trust mode on the interface: dot1p, dscp, or none. If the trust mode is
none, the port priority is used for priority mapping.
qos trust
Use qos trust to configure the priority trust mode for an interface.