Command Reference Guide

81
Default
An interface uses the WRR queuing algorithm.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view
Predefined user roles
network-admin
Examples
# Enable SP queuing on FortyGigE 1/1/1.
<Sysname> system-view
[Sysname] interface FortyGigE 1/1/1
[Sysname-FortyGigE1/1/1] qos sp
Related commands
display qos queue sp interface
WRR commands
display qos queue wrr interface
Use display qos queue wrr interface to display the WRR queuing configuration on an interface.
Syntax
display qos queue wrr interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify an
interface, this command displays the WRR queuing configuration of all the interfaces.
Examples
# Display the WRR queuing configuration of FortyGigE 1/1/1.
<Sysname> display qos queue wrr interface FortyGigE 1/1/1
Interface: FortyGigE1/1/1
Output queue: Weighted Round Robin queuing
Queue ID Group Byte-count
-----------------------------------------
be 1 1
af1 1 2
af2 1 3
af3 1 4
af4 1 5