Command Reference Guide

86
cs7 1 1 64
Table 34 Command output
Field Descri
p
tion
Interface Interface type and interface number.
Output queue Type of the current output queue.
Queue ID ID of a queue.
Group
Number of the WFQ group that holds the queue. By default, all queues
are in group 1.
Byte-count Byte-count scheduling weight of the queue.
Min-Bandwidth Minimum guaranteed bandwidth.
qos bandwidth queue
Use qos bandwidth queue to set the minimum guaranteed bandwidth for a queue on an interface.
Use undo qos bandwidth queue to restore the default.
Syntax
qos bandwidth queue queue-id min bandwidth-value
undo qos bandwidth queue queue-id
Default
The minimum guaranteed bandwidth is 64 kbps.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view
Predefined user roles
network-admin
Parameters
queue-id: Specifies a queue by its ID. The value is an integer in the range of 0 to 7 or a keyword listed
in Table 33.
min band
width-value: Specifies the minimum guaranteed bandwidth in kbps. The value range for the
bandwidth-value argument is 8 to 40000000 for 40-GE interfaces.
Usage guidelines
You must use the qos wfq command to enable WFQ before you can configure this command on an
interface.
Examples
# Set the minimum guaranteed bandwidth to 100 kbps for queue 0 on FortyGigE 1/1/1.
<Sysname> system-view
[Sysname] interface FortyGigE 1/1/1
[Sysname-FortyGigE1/1/1] qos wfq weight
[Sysname-FortyGigE1/1/1] qos bandwidth queue 0 min 100