hp mp3130 digital projector user’s guide 1 Downloaded from www.Manualslib.
Notice This manual and any examples contained herein are provided “as is” and are subject to change without notice. Hewlett-Packard Company makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard Company shall not be liable for any errors or for incidental or consequential damages in connection with the furnishing, performance, or use of this manual or the examples herein.
Contents 1 Setting Up What’s in the Box?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Identifying Common Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Projector at a glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Projector buttons and lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 3 Adjusting the Projector Adjusting the Picture and Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . To adjust the shape of the picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . To adjust the image according to the type of picture . . . . . . . . . . . . . . . . . . . . . . . . . . . To adjust other image settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 6 Fixing Problems Troubleshooting Suggestions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Start-up problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Picture problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sound problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 6 Downloaded from www.Manualslib.
1 Setting Up The chapter explains how to install and set up the HP digital projector. ■ “What’s in the Box?” on page 8 ■ “Identifying Common Features” on page 9 ■ “Setting Up the Projector” on page 16 ■ “Turning On and Off” on page 27 ■ “Making Basic Adjustments” on page 29 User’s Guide Downloaded from www.Manualslib.
Setting Up What’s in the Box? Before setting up your projector, be sure your shipping box includes the following items. If the shipping box does not contain any of the following items, contact HP. Identifying the contents of the box Symbol Item Function 1 2 3 4 Carrying case Carries and protects projector. Documentation CD Contains projector documentation. Projector with lens cap Displays images. Remote control and two AAA batteries Control projector.
Setting Up Identifying the contents of the box (continued) Symbol Item Function 9 Composite RCA video cable Connects device with RCA composite video output. - Mini-phone audio cable Connects audio source to projector. Identifying Common Features This section identifies common features and functions of the projector.
Setting Up Projector at a glance Identifying the projector Symbol Item Function 1 2 3 Button panel Contains buttons and lights. Zoom ring Enlarges picture size 100–120%. Focus ring Focuses at distances of 1.2 to 12 m (4 to 40 ft). 4 5 6 Lens cover Protects lens. Lamp latch Releases lamp housing for replacement. Tilt button Adjusts the height of the picture and extends the supports. 7 8 9 Support Adds extra stability to the projector.
Setting Up Projector buttons and lights Identifying buttons and lights on the projector Symbol Item Function 1 Enter button, back button, and directional arrows Change projector settings using the on-screen menu. 2 3 4 5 6 7 Source button Switches to the next input source. Theater video button Optimizes the picture for video input. Business graphics button Optimizes the picture for data input. Power button Turns the projector on or off. Lamp-warning light Turns on when lamp fails.
Setting Up Back panel Identifying the back panel Symbol Item Function 1 M1 input Connects various equipment with analog- and digital-video output, including computers. Also supports USB-device output for controlling a mouse. 2 S-video input Connects video input from devices like VCRs and DVD players. 3 4 5 Composite-video input Connects video input from devices like VCRs. Audio input Connects audio source. Main power Connects power cord to projector. 12 Downloaded from www.Manualslib.
Setting Up Remote control using the remote control, install two AAA batteries. See “To replace the ✎ Before battery in the remote control” on page 50. Identifying the remote control with case closed Symbol Item Function 1 Page-up and page-down down 2 Left-click and right-click mouse Perform left-click and right-click functions for functions a connected computer. 3 4 5 Hide Hides the display. Source Switches to the next input source. Power Powers on and off the projector.
Setting Up To reduce the risk of injury to the eyes, do not look directly into the Å WARNING: remote control laser light, and do not point the laser light into anyone’s eyes. Identifying remote control with case open Symbol Item Function 1 2 Theater video button Optimizes the picture for video input. Menu buttons Change projector settings using the on-screen menu. 3 Auto sync Resynchronizes the projector to the input signal. 4 Business graphics button Optimizes the picture for data input.
Setting Up Accessories HP offers accessories that can enhance the operation of your HP projector. See your projector dealer or visit http://www.hp.com to purchase accessories such as these: ■ Smart attachment module (connect a computer through your local network, add an optional 802.11b card for wireless computer connections, and more) ■ Ceiling mount ■ Projector screen ■ Power cables ■ Replacement lamp module ■ Video cables User’s Guide Downloaded from www.Manualslib.
Setting Up Setting Up the Projector This section describes how to set up, plan, and connect the projector. ■ “To position projector” on page 17 ■ “To set up on a table” on page 19 ■ “To connect power” on page 19 ■ “To connect a computer” on page 20 ■ “To connect a handheld organizer” on page 22 ■ “To connect video sources” on page 23 16 Downloaded from www.Manualslib.
Setting Up To position projector The following tables show you where to position the projector in relation to the screen. Identifying image size relative to distance from screen Image size (diagonal) Image size (width) Distance (lens to screen) 30 in. 0.8 m 24 in. 0.6 m 47–48 in. 1.2 m 40 in. 1.0 m 32 in. 0.8 m 54–65 in. 1.4–1.6 m 60 in. 1.5 m 48 in. 1.2 m 81–97 in. 2.1–2.5 m 80 in. 2.0 m 64 in. 1.6 m 108–129 in. 2.7–3.3 m 100 in. 2.5 m 80 in. 2.0 m 135–161 in. 3.4–4.
Setting Up If you do not want to use the distance table, you can use the following equations to help determine where to install the projector relative to the screen. Calculating projection dimensions distance from lens to screen = A × width of screen minimum and maximum distance from screen = B width of screen = 0.8 × diagonal of screen (for 4:3 screen) projector lens below bottom of screen = C × width of screen (for 4:3 screen) A = 1.67 to 2.00 B = 1.2 to 12 m (4 to 40 ft) C = 0.21 to 0.
Setting Up To set up on a table 1. Place the projector on a stable platform located 1.2 to 12 m (4 to 40 ft) in front of the screen. Ideally, the platform should be lower than the bottom of the screen. 2. Connect one end of the power cord to the back of the projector and the other end to an electrical outlet. 3. When you first turn on the projector, set it to match the installation, if necessary. Open the on-screen menu and select Setup > Projector position.
Setting Up To connect a computer Computer with VGA port 1. Connect the M1-to-VGA/USB cable between the M1 port on the projector 1 and the VGA port on the computer 2. 2. (Optional) To allow the remote control to function as the computer mouse, connect the USB plug of the M1-to-VGA/USB cable into the USB port on the computer 3. 3. (Optional) To get audio, connect the mini-phone audio cable between the audio port on the projector 4 and the computer 5 20 Downloaded from www.Manualslib.
Setting Up Computer with DVI port The connections are similiar to the VGA computer connection. For a visual aid, see the previous image. 1. Connect an M1-to-DVI/USB cable (available from HP) between the M1 port on the projector 1 and the DVI port on the computer 2. 2. (Optional) To allow the remote control to function as the computer mouse, connect the USB plug of the M1-to-DVI/USB cable into the USB port on the computer 3. 3.
Setting Up To connect a handheld organizer 1. Be sure the handheld organizer has a VGA-out port. If necessary, install a VGA-out accessory card into the organizer. all handhelds come with VGA-out ports. For example, the iPAQ Pocket PC ✎ Not requires a VGA-out PC Card with 15-pin connector. 2. Connect an M1-to-VGA/USB cable between the M1 port on the projector 1 and the other end to the VGA-out PC Card 2 on the organizer. 22 Downloaded from www.Manualslib.
Setting Up To connect video sources S-video connection Many DVD players and VCRs have S-video output. 1. Connect the S-video cable between the S-video port on the projector 1 and the video device 2. 2. (Optional) To get audio, connect the mini-phone audio cable between the audio port on the projector 3 and the video device 4. If the video device has RCA audio connectors, use a mini-phone to RCA adapter or cable. User’s Guide Downloaded from www.Manualslib.
Setting Up Composite video connection Many VCRs and other video equipment have composite video output, a single RCA video output connector. 1. Connect the composite video cable (RCA connector) between the composite video port on the projector 1 and RCA video port on the video device 2. 2. (Optional) To get audio, connect the mini-phone audio cable between the audio port on the projector 3 and the video device 4. If the video device has RCA audio connectors, use a mini-phone to RCA adapter or cable.
Setting Up Component video connection Many DVD players and other high-quality video devices provide component video output, usually three RCA connectors labeled YPbPr or YCbCr. 1. Connect an M1-to-component-video cable (available from HP) between the M1 port on the projector 1 and YPbPr or YCbCr port on the video device 2. 2. (Optional) To get audio, connect the mini-phone audio cable between the audio port on the projector 3 and the video device 4.
Setting Up SCART connection Several types of video devices provide a SCART video connection. 1. Connect an M1-to-SCART adapter cable (available from HP) to the M1 port on the projector 1, then connect a SCART cable from the adapter to the SCART device 2. 2. (Optional) To get audio, connect the mini-phone audio cable between the audio port on the projector 3 and the video device 4. If the video device has RCA audio connectors, use a mini-phone to RCA adapter or cable.
Setting Up Turning On and Off This section provides instructions on turning the projector on and off. ■ “To turn the projector on” on page 27 ■ “To turn the projector off” on page 28 ■ “To reset the projector” on page 28 To turn the projector on 1. Be sure the power cord is connected. 2. Remove the lens cap by pressing in on the tabs 1 on either side of the lens cap and pulling it straight out 2. 3. Press the power button 3 on top of the projector, or press the power button on the remote control. 4.
Setting Up To turn the projector off 1. Press the power button on the projector or remote control to turn off the projector. The power button blinks during the cool-down period, then the projector turns off. 2. You can disconnect video and audio equipment from the projector during the cool-down period, but not the power cord. 3. If you must unplug or remove the projector, wait until the power light stops blinking, then unplug the power cord.
Setting Up Making Basic Adjustments This section provides instructions on making basic adjustments to the projector. ■ “To aim the projector” on page 29 ■ “To adjust the focus and zoom” on page 30 To aim the projector you press the tilt button to aim the projector, the supports pop out from the ✎ Whenever base and provide extra stability.
Setting Up To adjust the focus and zoom 1. Rotate the focus ring until the image becomes clear. The projector can be focused at distances of 1.2 to 12 m (4 to 40 ft). 2. Rotate the zoom ring to adjust the picture size from 100 to 120%. If the picture does not fit the screen, you might have to move the projector closer to the screen. 30 Downloaded from www.Manualslib.
2 Giving Presentations The chapter explains how to give presentations with the projector. ■ “Using the Remote Control” on page 31 ■ “Showing Presentations” on page 33 Using the Remote Control ■ To turn the project on or off, press the power button 5. ■ To turn on the laser pointer, hold down the blue laser ring 6. ■ To hide or unhide the projected picture, press the hide button 3. ■ To switch to the next connected input source, press the source button 4.
Giving Presentations ■ To control page-up and page-down on a computer, press the page-up 1 and page-down 1 buttons. This feature requires a USB connection between the projector and computer. ■ Slide the remote control case open to use additional buttons. ❏ To optimize the picture for the type of input signal, press the business graphics or the theater video button. ❏ To change projector settings using the on-screen menu, press enter and use the navigation buttons to make the changes.
Giving Presentations Showing Presentations This section describes several things you can do during presentations. ■ “To present from a computer” on page 33 ■ “To change the source” on page 34 ■ “To hide or show the display” on page 34 To present from a computer 1. Be sure the computer is connected to the projector. See “To connect a computer” on page 20 for more information. 2. Be sure the computer and the projector are on. See “To turn the projector on” on page 27 for more information.
Giving Presentations To change the source To change the source, either: ■ Press the source button on the projector or remote control. ■ Open the on-screen menu, select Input, and select the port to which the input source is connected. To hide or show the display You can hide the display from your audience temporarily. ■ Press the hide button on the remote control. ■ Open the on-screen menu and select Quick choice > Hide.
3 Adjusting the Projector This chapter describes how to make adjustments to the projector. ■ “Adjusting the Picture and Sound” on page 35 ■ “Using the On-Screen Menu” on page 38 Adjusting the Picture and Sound This section provides the following instructions on adjusting the picture and sound.
Adjusting the Projector ❏ If you want to turn on automatic vertical keystone correction, press the enter button until this option is enabled. ❏ If you want to disable the automatic correction, press the enter button until the option is disabled. 3. Press the back button to save the settings. you adjust the keystone correction using the up or down buttons, the ✎ Ifautomatic correction is suspended until you manually enable it again or turn off the projector.
Adjusting the Projector To adjust other image settings The on-screen menu provides many settings that allow you to fine-tune the picture. 1. Open the on-screen menu and select Adjust Picture. 2. Change the picture adjustments as needed. From the Adjust Picture menu, you can change basic and advanced picture options, such as brightness, contrast, aspect ratio, and keystone correction. To get descriptions for all available picture adjustments, see “Adjust picture menu” on page 42.
Adjusting the Projector Using the On-Screen Menu This section explains how to navigate the on-screen menu and provides function definitions. The tables in this section describe all the functions available in the on-screen menu for the firmware version at publication. If your firmware is a different version, some menus might differ from those shown.
Adjusting the Projector To change settings using the on-screen menu You can change the on-screen menu settings with either the buttons on the projector or on the remote control. 1. Press enter on the projector or the remote control to open the on-screen menu. 2. Press up or down the highlighted menu. to highlight the desired menu, and press enter to select 3. Press up or down to highlight the desired parameter, and press enter to select the highlighted option. 4.
Adjusting the Projector Quick choice menu This menu provides quick access to commonly used functions from other menus. The menu in your projector might differ from the menu shown below. Quick choice Keystone correction Corrects the slanted edges of an image. This function compensates for of an image that is not automatically corrected by the projector. Reset keystone correction Resets keystone correction to zero. Next input Searches for the next available signal from an input source.
Adjusting the Projector Input menu For a visual aid, see “Back panel” on page 12. Input Digital/analog graphics (M1) Shows the digital or analog input to the M1 port. This port connects to several types of devices, including analog VGA and SCART devices and digital Digital Video Interface (DVI) devices. This connection is considered graphics or video input, depending on the device.
Adjusting the Projector Adjust picture menu Adjust picture Picture mode Adjusts the color settings for the type of picture. You can optimize the picture for computer presentations or video output. The remote control and projector have buttons to change the picture mode. Brightness Brightens or darkens the image. Contrast Sets the difference between light and dark areas. Color space For certain component inputs, selects the type of signal encoding used by the input source.
Adjusting the Projector Adjust picture (continued) Reset keystone correction Resets keystone correction to zero. Aspect ratio Selects the proportions of the image that is not automatically corrected by the projector. • To automatically adapt to most inputs, select Best Fit. • To stretch the picture to cover the entire projection area, select Fill. • If a wide-screen picture seems stretched, select 16:9. • To show each picture dot as one projected dot, select 1-to-1.
Adjusting the Projector Audio menu Audio Mute Stops the audio output. Volume Changes the loudness of the audio. Treble Changes the loudness of the higher frequencies. Bass Changes the loudness of the lower frequencies. Reset audio settings Resets this menu to the default values. Setup menu Setup Language Selects the language for the menus. Lamp saver Sets a lower light output for longer lamp life.
Adjusting the Projector Help menu Help About this projector Displays information and status for the projector. Diagnostics Show tests for checking the operation of the projector and the remote control. User’s Guide Downloaded from www.Manualslib.
Adjusting the Projector 46 Downloaded from www.Manualslib.
4 Maintaining the Projector This chapter explains how to maintain the projector. ■ “Performing Routine Maintenance” on page 47 ■ “Upgrading the Projector” on page 51 Performing Routine Maintenance This section provides instructions on performing routing maintenance.
Maintaining the Projector Cleaning requires special consideration: Ä CAUTION: ■ Do not spray any type of fluid or cleaner directly on the lens surface. Cleaners might damage the lens. ■ Do not use fabric softener when washing a cleaning cloth or softener sheets when drying the cloth. Chemicals on the cloth might damage the surface of the lens. ■ Do not store a cleaning cloth in contact with the lens for a long time because doing so contaminates the lens with dye from the cloth.
Maintaining the Projector 6. Turn on the projector. If the lamp does not turn on after the warm-up period, try reinstalling the lamp again. 7. Open the on-screen menu and select Setup > Reset lamp hours. The lamp contains a small amount of mercury. If the lamp breaks, Å WARNING: adequately ventilate the area where the breakage occurred. Disposal of this lamp might be regulated due to environmental considerations.
Maintaining the Projector To replace the battery in the remote control 1. Slide the remote control case open to reveal the battery compartment. 2. On the back of the remote control remove the battery cover 1 to reveal the batteries. 3. Remove the old batteries and install two new AAA batteries 2. 4. Install the battery cover. When discarding old batteries, contact your local waste-disposal provider regarding local restrictions on the disposal or recycling of batteries. 50 Downloaded from www.Manualslib.
Maintaining the Projector Upgrading the Projector To update the firmware HP might periodically release updated versions of the projector firmware to enhance the projector performance. The projector firmware version is shown in the on-screen menu at Help > About this projector. Check for updated versions at http://www.hp.com/go/proj_firmware. USB method 1.
Maintaining the Projector 52 Downloaded from www.Manualslib.
5 Installing Permanently This chapter explains how to permanently install the digital projector. Installing the Projector This section provides instructions on how to permanently install the projector.
Installing Permanently 3. Attach the tripod mounting block to the tripod mount hole on the bottom of the projector. 4. Attach the projector and tripod mounting block to the tripod according to the tripod manufacturer’s instructions. To install on a table This installation is covered in detail in Chapter 1. See “Setting Up the Projector” on page 16 for more information. 54 Downloaded from www.Manualslib.
Installing Permanently To install on the ceiling To minimize the risk of injury from improperly installed equipment, it Å WARNING: is recommended that a professional installer performs the ceiling installation. 1. Align the end of the ceiling-mount bracket with the center hole in the lower-mount bracket, and firmly secure it with a washer and bolt. 2. Attach the mounting bracket to the projector. See the instructions that came with the ceiling mount. 3.
Installing Permanently To install for rear projection 1. Place the projector 1.2 to 12 m (4 to 40 ft) behind a translucent screen that is designed for rear projection. See “To set up on a table” on page 19 or “To install on the ceiling” on page 55 for more instructions. 2. Open the on-screen menu and select Setup > Projector position. Then select Rear Table or Rear Ceiling from the drop-down list. 56 Downloaded from www.Manualslib.
Installing Permanently To lock the projector The projector includes a built-in slot to secure the projector with a cable and a lock (such as the Kensington MicroSaver lock system, available at many computer stores). 1. Wrap the cable around a secure object, such as a table leg. Loop the cable to create a slip knot around the stationary object, and be sure it cannot slip off. 2. Insert the lock 1 into the hole and twist the key 2. User’s Guide Downloaded from www.Manualslib.
Installing Permanently 58 Downloaded from www.Manualslib.
6 Fixing Problems This chapter describes potential problems and offers suggestions to help correct them. ■ “Troubleshooting Suggestions” on page 59 ■ “Testing the Projector” on page 67 Troubleshooting Suggestions To use this section, find the problem statement that is closest to your problem, then try each bulleted item one at a time until your problem is fixed. If the suggestions do not solve your problem, contact HP. See the Support Guide included with the projector.
Fixing Problems Start-up problems If no lights or sounds turn on: ❏ Be sure that the power cable is securely connected to the projector and the other end is plugged into an outlet with power. ❏ Press the power button again. If nothing is projected but the projector seems to start up: ❏ Be sure the lens cap has been removed. ❏ Check the front of the projector—the latch for the lamp module should be down. ❏ If the lamp indicator is on, replace or reinstall the lamp module.
Fixing Problems Picture problems If the image is not displayed on the screen, but the HP startup screen is displayed: ❏ Press the source button on the projector or remote control. ❏ Turn off or disable the notebook or desktop computer screen saver function. ❏ For a computer connection, ensure your notebook computer’s external video port is turned on. See the video port card shipped with the projector. On some notebooks, for example, press the Fn + F4 function keys to turn on the external video port.
Fixing Problems If the image is out of focus: ❏ Be sure the lens cap is removed. ❏ While displaying the on-screen menu, adjust the focus ring. (The image size should not change; if it does, you are adjusting the zoom not the focus.) ❏ Ensure the projection screen is 1.2 to 12 m (4 to 40 ft) from the projector. ❏ For a computer connection, set the display resolution on the computer to 1024 x 768 pixels. ❏ Check the projection lens to see if it needs cleaning.
Fixing Problems If a scrolling or cut-off image is displayed: ❏ Press the auto sync button on the projector or remote control. ❏ If digital magnification is activated, press enter to cancel it. ❏ For a computer connection, turn everything off, then power on the projector first and power on the notebook or desktop computer second. ❏ For a computer connection, if the above steps do not correct the display image, adjust the resolution of the notebook or desktop computer to 1024 x 768 pixels.
Fixing Problems ❏ Open the on-screen menu and select Adjust picture > Color space. Change the selection. ❏ Open the on-screen menu and select Help > Diagnostics. Run color tests. If the projected colors seem completely wrong: ❏ For a YPbPr or RGB input device, be sure all the video connectors are correctly matched. ❏ Be sure the pins on the cable connectors are not bent or broken. ❏ Open the on-screen menu and select Adjust picture > Color space. Change the selection.
Fixing Problems Sound problems If no sound is coming out of the projector: ❏ Be sure you have an audio cable securely connected between the projector and the input device. ❏ Be sure that the mute and volume settings are correct on the input device, such as a computer, DVD player, or camcorder. ❏ Open the on-screen menu and select Audio. Check the following settings: ◆ Mute is turned off. ◆ Volume is correct.
Fixing Problems If the lamp shuts off during a presentation: ❏ A minor power surge might cause the lamp to shut off. Wait a few minutes, then power on the projector. ❏ The lamp module might have burned out. Replace the lamp module. If the lamp burns out or makes a popping sound: ❏ When the lamp reaches its end of life, it might burn out and make a popping sound. If this happens, the projector will not turn back on until the lamp module has been replaced.
Fixing Problems Testing the Projector The on-screen menu contains diagnostic tests you can use to verify the proper operation of the projector and the remote control. To run the projector diagnostics 1. Open the on-screen menu and select Help > Diagnostics. 2. Select a test to perform. User’s Guide Downloaded from www.Manualslib.
Fixing Problems 68 Downloaded from www.Manualslib.
7 Reference This chapter lists the specifications, safety information, and regulatory information for the projector. ■ “Specifications” on page 69 ■ “Safety Information” on page 75 ■ “Regulatory Information” on page 77 Specifications Because HP continually improves its products, the following specifications are subject to change. For the latest specifications, visit the HP website at http://www.hp.com.
Reference Identifying the projector specifications (continued) IR receivers On left and right sides of projector Size 197 mm x 78 mm x 231 mm (7.8 in. × 3.0 in. × 9.1 in.) Weight 1.7 kg (3.8 lb) Lens 2.02 to 1.68 throw ratio (distance/width) Optical zoom 1.2:1 Digital zoom Yes Keystone Automatic correction: up to ±30° vertical Manual correction: up to ±30° vertical, up to ±12° horizontal Audio 2-W peak sound Lamp 180-W P-VIP lamp, 1.
Reference Identifying the projector specifications (continued) Noise level 37 dBA Environment Operating: Temperature: 10 to 35°C (50 to 95°F) Humidity: 80% RH max, non-condensing Altitude: up to 3,000 m (10,000 ft), up to 25°C (77°F) Storage: Temperature: -20 to 55°C (-4 to 131°F) Humidity: 80% RH max, non-condensing Altitude: up to 12,000 m (40,000 ft) User’s Guide Downloaded from www.Manualslib.
Reference Analog Video Mode Compatibility Compatibility Resolution V-Sync (Hz) H-Sync (kHz) VGA 640 x 350 70 31.5 640 x 350 85 37.9 640 x 400 85 37.9 640 x 480 60 31.5 640 x 480 72 37.9 640 x 480 75 37.5 640 x 480 85 43.3 720 x 400 70 31.5 720 x 400 85 37.9 800 x 600 56 35.2 800 x 600 60 37.9 800 x 600 72 48.1 800 x 600 75 46.9 800 x 600 85 53.7 1024 x 768 60 48.4 1024 x 768 70 56.5 1024 x 768 75 60.0 1024 x 768 85 68.7 1280 x 1024 60 63.
Reference Analog Video Mode Compatibility (continued) Compatibility Resolution V-Sync (Hz) H-Sync (kHz) MAC 16 832 x 624 74.55 49.725 MAC 19 1024 x 768 75 60.24 MAC 1152 x 870 75.06 68.68 MAC G4 640 x 480 60 31.35 MAC G4 640 x 480 120 68.03 MAC G4 1024 x 768 120 97.09 i Mac DV 640 x 480 117 60 i Mac DV 800 x 600 95 60 i Mac DV 1024 x 768 75 60 i Mac DV 1152 x 870 75 68.49 i Mac DV 1280 x 960 75 75 i Mac DV 1280 x 1024 75 90.
Reference Digital Video Mode Compatibility Compatibility Resolution V-Sync (Hz) H-Sync (kHz) VGA 640 x 350 70 31.5 640 x 350 85 37.9 640 x 400 85 37.9 640 x 480 60 31.5 640 x 480 72 37.9 640 x 480 75 37.5 640 x 480 85 43.3 720 x 400 70 31.5 720 x 400 85 37.9 800 x 600 56 35.2 800 x 600 60 37.9 800 x 600 72 48.1 800 x 600 75 46.9 800 x 600 85 53.7 1024 x 768 60 48.4 1024 x 768 70 56.5 1024 x 768 75 60.0 1280 x 1024 60 63.
Reference Safety Information Safety precautions Å WARNING: Observe the following precautions to reduce the risk of injury. ■ To prevent eye injury, do not look directly into the lens when the lamp is on. Do not point the laser light into anyone’s eyes. ■ To prevent electrical shock, do not expose the projector to rain or moisture. Do not open the projector except as instructed by the manual.
Reference LED safety The infrared ports located on the digital projector and remote control are classified as Class 1 LED devices according to International Standard IEC 825-1 (EN60825-1). This device is not considered harmful, but the following precautions are recommended: ■ If the unit requires service, contact an authorized HP service center. ■ Do not attempt to make any adjustment to the unit. ■ Avoid direct eye exposure to the infrared LED beam.
Reference Regulatory Information This section presents information that shows how your digital projector complies with regulations in certain regions. Any modifications to your digital projector not expressly approved by HP could void the authority to operate the digital projector in these regions. U.S.A. This digital projector has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Reference Japan Korea 78 Downloaded from www.Manualslib.
Reference International For regulatory identification purposes, your product is assigned a regulatory model number. The regulatory model number for your product is listed in the declaration of conformity. This regulatory number is different from the marketing name and product number. Manufacturer's Name: Manufacturer's Address: DECLARATION OF CONFORMITY According to ISO/IEC Guide 22 and EN 45014 Hewlett Packard Company Hewlett Packard Company Digital Projection & Imaging 1000 NE Circle Blvd.
Reference 80 Downloaded from www.Manualslib.
Index A accessories listing 15 adjust picture 37 aiming the projector raising and lowering 29 analog video mode compatibility 72 audio adjusting 37 composite video connection 24 computer with DVI port 21 computer with VGA port 20 handheld organizer 22 SCART connection 26 with S-video 23 connections see back panel contents in the box 8 B D back panel identifying 12 business graphics mode see picture mode buttons projector 11 remote control 13 dimensions of screen and room 17 distance setting up in relat
Index I M image adjusting 37 input/output connectors see back panel installation see ceiling installation see rear projection installation see table installation maintenance routine maintenance 47 menu see on-screen menu mercury 49 K Kensington lock 57 keystone correction adjusting 35 L lamp module replacing 48 lamp saver mode 37 language changing 37 laser pointer 31 laser safety precautions 75 LED safety precautions 76 lens care 47 cleaning 47 lights identifying 11 location see ceiling installation s
Index R rear panel see back panel rear projection installation setting up 56 remote control battery replacement 50 identifying with doors closed 13 identifying with doors open 14 using 31 resetting projection settings 64 projector 28 S safety information laser safety 75 LED 76 precautions 75 SCART connection connecting video source 26 security locking 57 setup adjusting 37 see also ceiling installation see also rear projection see also table installation slanted edges see keystone correction sound see aud
Index Index 84 Downloaded from www.Manualslib.
