hp mp3220 series digital projector user’s guide 1
Notice The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Contents 1 Setting Up What’s in the Box?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Identifying Common Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Projector at a glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Projector buttons and lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 3 Adjusting the Projector Adjusting the Picture and Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . To adjust a slanted picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . To adjust the image according to the type of picture . . . . . . . . . . . . . . . . . . . . . . . . . . . To adjust other image settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 6 Fixing Problems Troubleshooting Suggestions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Start-up problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Picture problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sound problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 6 User’s Guide
1 Setting Up The chapter explains how to install and set up the HP digital projector.
Setting Up What’s in the Box? Before setting up your projector, be sure your shipping box includes the following items. If the shipping box does not contain any of the following items, contact HP. 1 2 8 7 6 5 4 3 Identifying the contents of the box Symbol 8 Item Function 1 Projector Displays images. 2 3 Carrying case Carries and protects projector. USB cable Connects to computer USB input. 4 5 VGA cable Connects to computer video output. Remote control Control projector.
Setting Up Identifying Common Features This section identifies common features and functions of the projector.
Setting Up Projector at a glance 2 3 5 4 1 6 7 Identifying the projector Symbol Item 10 Function 1 2 3 4 Power cord socket Connects power cord to projector. Button panel Contains buttons and lights. Zoom ring Enlarges picture size 100–120%. Focus ring Focuses at distances of 1.2 to 12 m (4 to 40 ft). 5 Height adjustment button Adjusts the height of the picture. 6 7 Receiver for remote control Receives signals from the remote control. Lens cover Protects lens.
Setting Up Projector buttons and lights 2 3 4 6 5 EDFN DXWR V\QF 1 8 7 9 Identifying buttons and lights on the projector Symbol Item User’s Guide Function 1 2 Power button Turns the projector on or off. Enter button, back button, and directional arrows Change projector settings using the on-screen menu. 3 Auto sync button Resynchronizes the projector to the input signal. 4 Page-up and page-down buttons Scroll up and down through pages on a connected computer.
Setting Up Back panel 4 5 3 6 7 2 LQ LQ 6 9*$ LQ 1 Identifying the back panel Symbol Item 12 Function 1 2 3 4 Security slot Secures the projector using a cable lock. Receiver for remote control Receives signals from the remote control. USB output Connects to computer to control the mouse. Audio input Connects audio source. 5 6 Composite-video input (RCA) Connects video input from devices like VCRs. S-video input Connects video input from devices like VCRs and DVD players.
Setting Up Remote control using the remote control, remove the battery protector by pulling the plastic tab ✎ Before until it comes out of the remote control. 6 7 5 5 4 2 3 2 8 1 9 Identifying the remote control buttons Symbol Item User’s Guide Function 1 Enter button, back button, and Change projector settings using the directional arrows on-screen menu. 2 Page-up and page-down buttons Scroll up and down through pages on a connected computer.
Setting Up Accessories Get more from your presentations with HP projector accessories. You can purchase accessories at www.hp.com or through your projector dealer. 14 ■ HP ceiling mount kit enables you to simply and discreetly install your projector on the ceiling. ■ HP mobile screens with built-in handles are easy to carry and set up anywhere you need them. ■ HP premium remote control allows you to control every aspect of your presentation. ■ HP power cables allow you to connect in any region.
Setting Up Setting Up the Projector This section describes how to set up, plan, and connect the projector.
Setting Up To position the projector The following tables show you where to position the projector in relation to the screen. Identifying image size relative to distance from screen Image size (diagonal) 16 Image size (width) Distance (lens to screen) 30 in. 0.8 m 24 in. 0.6 m 48–58 in. 1.2–1.5 m 40 in. 1.0 m 32 in. 0.8 m 64–77 in. 1.6–2.0 m 60 in. 1.5 m 48 in. 1.2 m 96–115 in. 2.4–2.9 m 80 in. 2.0 m 64 in. 1.6 m 128–154 in. 3.3–3.9 m 100 in. 2.5 m 80 in. 2.0 m 160–192 in.
Setting Up If you do not want to use the distance table, you can use the following equations to help determine where to install the projector relative to the screen. Calculating projection dimensions distance from lens to screen = A × width of screen minimum and maximum distance from screen = B width of screen = 0.8 × diagonal of screen (for 4:3 screen) projector lens below bottom of screen = C × width of screen (for 4:3 screen) A = 2.0 to 2.4 B = 1.2 to 12 m (4 to 40 ft) C = 0.11 to 0.
Setting Up To connect power ■ Connect one end of the power cord to the side of the projector 1 and the other end to an electrical outlet 2.
Setting Up To connect a computer 1. Connect the VGA cable between the VGA port on the projector 1 and the VGA port on the computer 2. 2. (Optional) To allow the remote control to function as the computer mouse, connect the USB cable between the USB port on the projector 3 and the USB port on the computer 4. 3. (Optional) To get audio, connect a mini-phone audio cable (not provided) between the audio port on the projector 5 and the computer 6.
Setting Up To connect a handheld organizer 1. Be sure the handheld organizer has a VGA-out port. If necessary, install a VGA-out accessory card into the organizer. all handhelds come with VGA-out ports. For example, the iPAQ Pocket PC ✎ Not requires a VGA-out PC Card with 15-pin connector. 2. Connect the VGA cable between the VGA port on the projector 1 and the VGA-out PC Card 2 on the organizer.
Setting Up To connect video sources If you have a SCART video device, you will need an adapter (available from HP) to connect the device to the projector. S-video connection Many DVD players and VCRs have S-video output. 1. Connect an S-video cable (not provided) between the S-video port on the projector 1 and the video device 2. 2. (Optional) To get audio, connect a mini-phone audio cable (not provided) between the audio port on the projector 3 and the video device 4.
Setting Up Composite video connection Many VCRs and other video equipment have composite video output, a single RCA video output connector. 1. Connect a composite video cable (RCA connector) (not provided) between the composite video port on the projector 1 and the RCA video port on the video device 2. 2. (Optional) To get audio, connect a mini-phone audio cable (not provided) between the audio port on the projector 3 and the video device 4.
Setting Up Component video connection Many DVD players and other video equipment have component-video output, three RCA connectors labeled "Y,Pb,Pr", "R,G,B", or similar. 1. Connect a VGA-to-component video cable (available from HP) between the VGA port on the projector 1 and the three RCA component-video connectors on the video device 2. 2. (Optional) To get audio, connect a mini-phone audio cable (not provided) between the audio port on the projector 3 and the video device 4.
Setting Up Turning On and Off This section provides instructions on turning the projector on and off. ■ “To turn the projector on” on page 24 ■ “To turn the projector off” on page 25 To turn the projector on 1. Be sure the power cord is connected. 2. Open the lens cover 1 by rotating it. 3. Press the power button 2 on top of the projector, or press the power button on the remote control. 2 1 4. Connect and power on the source, such as computer, handheld organizer, or DVD player.
Setting Up To turn the projector off 1. Press the power button on the projector or remote control to turn off the projector. The power button blinks during the cool-down period, then the projector turns off. 2. You can disconnect video and audio equipment from the projector during the cool-down period, but not the power cord. 3. If you must unplug or remove the projector, wait until the power light stops blinking, then unplug the power cord.
Setting Up Making Basic Adjustments This section provides instructions on making basic adjustments to the projector. ■ “To aim the projector” on page 26 ■ “To adjust the focus and zoom” on page 27 To aim the projector ■ To raise the projected picture on the screen, press the height adjustment button 1 and lift the front of the projector to the desired display angle 2. Release the button to lock the adjustment.
Setting Up To adjust the focus and zoom 1. Rotate the focus ring until the image becomes clear. The projector can be focused at distances of 1.2 to 12 m (4 to 40 ft). 2. Rotate the zoom ring to adjust the picture size from 100 to 120%. If the picture does not fit the screen, you might have to move the projector closer to the screen.
Setting Up 28 User’s Guide
2 Giving Presentations The chapter explains how to give presentations with the projector. ■ “Using the Remote Control” on page 29 ■ “Showing Presentations” on page 31 Using the Remote Control 6 7 5 5 4 2 3 2 8 1 9 ■ To turn the projector on or off, press the power button 7. ■ To hide or unhide the projected picture, press the hide button 6. ■ To switch to the next connected input source, press the source button 3.
Giving Presentations ■ To operate as a mouse on a computer, press the edge of the mouse pad 4 in the direction you want the pointer to move, and press the left-click 5 or right-click 5 button. This feature requires a USB connection between the projector and computer. ■ To control page-up and page-down on a computer, press the page-up and page-down buttons 2. This feature requires a USB connection between the projector and computer.
Giving Presentations Showing Presentations This section describes several things you can do during presentations. ■ “To present from a computer” on page 31 ■ “To change the source” on page 32 ■ “To hide or show the display” on page 32 To present from a computer 1. Be sure the computer is connected to the projector. See “To connect a computer” on page 19 for more information. 2. Be sure the computer and the projector are on. See “To turn the projector on” on page 24 for more information.
Giving Presentations To change the source To change the source, either: ■ Press the source button on the projector or remote control. ■ Open the on-screen menu, go to Select input and select the port to which the input source is connected. To hide or show the display You can hide the display from your audience temporarily. ■ Press the hide button on the remote control.
3 Adjusting the Projector This chapter describes how to make adjustments to the projector. ■ “Adjusting the Picture and Sound” on page 33 ■ “Using the On-Screen Menu” on page 36 Adjusting the Picture and Sound This section provides the following instructions on adjusting the picture and sound.
Adjusting the Projector To adjust the image according to the type of picture Use the picture mode buttons on the projector or the remote control to optimize the image. ■ To optimize the picture for data presentations, press the graphics projector. button on the The graphics button turns on. ■ To optimize the picture for video images, press the video projector. button on the The video button turns on. ■ To switch between these settings, press the picture mode remote control.
Adjusting the Projector To adjust the projector setup 1. Open the on-screen menu and select Setup. 2. Set the setup adjustments as needed. From the Setup menu, you can select settings such as menu language, projector position, and lamp saver mode. To get descriptions for all available setup adjustments, see “Setup menu” on page 42.
Adjusting the Projector Using the On-Screen Menu This section explains how to navigate the on-screen menu and provides function definitions. The tables in this section describe all the functions available in the on-screen menu for the firmware version at publication. If your firmware is a different version, some menus might differ from those shown.
Adjusting the Projector To change settings using the on-screen menu You can change the on-screen menu settings with either the buttons on the projector or on the remote control. EDFN DXWR V\QF SCREENSHOT 1. Press enter on the projector or the remote control to open the on-screen menu. 2. Press up or down to highlight the desired menu, and press right select the highlighted menu. to 3. Press up or down to highlight the desired parameter, and press enter to select the highlighted option. 4.
Adjusting the Projector Quick choice menu Quick choice 38 Keystone Corrects the slanted sides of an image. Reset keystone Resets keystone correction to zero. Next input Searches for the next available signal from an input source. Picture mode Adjusts the color settings for the type of picture. You can optimize the picture for computer presentations or video output. The remote control and projector have buttons to change the picture mode. Brightness Brightens or darkens the image.
Adjusting the Projector Select input menu For a visual aid, see “Back panel” on page 12. Select input VGA Shows the input to the VGA port. This usually connects to a computer, although it can also connect to a component-video device. This input is normally considered a graphics input. Composite video Shows the input to the yellow composite port (the input to the left of the S-video port on the back panel). The port usually connects to a TV or VCR. This input is normally considered a video input.
Adjusting the Projector Adjust picture menu Adjust picture Picture mode Adjusts the color settings for the type of picture. You can optimize the picture for computer presentations or video output. The remote control and projector have buttons to change the picture mode. Adjust picture mode... Changes settings that define the current picture mode. White intensity Sets the brightness of white areas. Picture enhancement Refines the color, lightness, and other characteristics of the picture.
Adjusting the Projector Adjust picture (continued) Tint Shifts colors toward red or green. Red Adjusts the amount of red in the picture. Green Adjusts the amount of green in the picture. Blue Adjusts the amount of blue in the picture. Color space For certain component inputs, selects the type of signal encoding used by the input source. You can override the selection made by the projector. Reset color settings Resets these color settings to their default settings. Shape settings...
Adjusting the Projector Setup menu Setup Language... Selects the language for the menus. Lamp saver Sets a lower power level for the lamp. Projector position Adjusts the image to match the orientation of the projector: upright or upside-down, in front of or behind the screen. Inverts or reverses the image accordingly. Timeout for menu Sets how many seconds the on-screen menu waits for input before it closes.
4 Maintaining the Projector This chapter explains how to maintain the projector. ■ “Performing Routine Maintenance” on page 43 ■ “Upgrading the Projector” on page 47 Performing Routine Maintenance This section provides instructions on performing routing maintenance.
Maintaining the Projector To clean the projector lens ■ To minimize the risk of damaging or scratching the lens surface, blow dust particles off the lens with clean, dry, deionized air. If this method does not work, use the following method: ■ Wipe the lens in a single direction with a clean, dry cloth. Do not wipe back and forth across the lens. If the cloth is dirty or smears the lens, wash the cloth. If the cloth is still dirty after washing it or the fabric is damaged, replace it.
Maintaining the Projector 1. Turn off the projector and allow it to cool for 30 minutes. 2. On the bottom of the projector, loosen the two screws on the lamp cover and remove the cover. 3. Loosen the two screws on the lamp module and pull out the module. 4. Insert the lamp module and tighten the two screws. 5. Install the cover and tighten the two screws. 6. Turn on the projector. If the lamp does not turn on after the warm-up period, try reinstalling the lamp again. 7.
Maintaining the Projector To replace the battery in the remote control 1. Pull out the battery holder. 2. Insert the new battery in the holder. 3. Push the holder into the remote control. 1 2 3 When discarding old batteries, contact your local waste-disposal provider regarding local restrictions on the disposal or recycling of batteries.
Maintaining the Projector Upgrading the Projector To update the firmware HP might periodically release updated versions of the projector firmware to enhance the projector performance. The projector firmware version is shown in the on-screen menu at Help. Check for updated versions at http://www.hp.com/go/proj_firmware. USB method 1. On a computer with a USB port, go to the HP projector upgrade website (see introduction for this section) and download the latest file intended for a USB upgrade. 2.
Maintaining the Projector 48 User’s Guide
5 Installing Permanently This chapter explains how to permanently install the digital projector. Installing the Projector This section provides instructions on how to permanently install the projector. ■ “To install on a table” on page 49 ■ “To install on the ceiling” on page 50 ■ “To install for rear projection” on page 52 ■ “To mount the projector on a tripod” on page 53 ■ “To lock the projector” on page 53 To install on a table This installation is covered in detail in Chapter 1.
Installing Permanently To install on the ceiling To minimize the risk of injury from improperly installed equipment, it Å WARNING: is recommended that a professional installer performs the ceiling installation. actual projector and mounting plate differ from those shown below, but the steps ✎ The are the same. 1. Attach the mounting plate to the bottom of the projector. The pointed part of the hole in the bracket faces the back of the projector. See the instructions that came with the ceiling mount. 2.
Installing Permanently 3. With the projector lens aiming away from the screen, insert the mounting plate onto the bracket so the tabs engage, then pivot the projector so it aims forward. Tighten the rear thumbscrew fully, then tighten the two other thumbscrews. 4. Adjust the on-screen menu to match your settings. Open the on-screen menu and select Setup > Projector position. Then select Front Ceiling from the drop-down list.
Installing Permanently If you do not use an HP ceiling mount, mount the projector according to the following dimensions: ■ X = 82 mm (3.23 in.) ■ Y = 55 mm (2.17 in.) ■ Z = 110 mm (4.33 in.) ■ Thread size = M3 To install for rear projection 1. Place the projector 1.2 to 12 m (4 to 40 ft) behind a translucent screen that is designed for rear projection. See “To set up on a table” on page 17 or “To install on the ceiling” on page 50 for more instructions. 2.
Installing Permanently To mount the projector on a tripod The projector includes standard tripod mount on the bottom of the projector. This allows the projector to be mounted on tripods readily available at camera and other electronic stores. Ä CAUTION: ■ The tripod should be capable of supporting a weight of at least 5 lb. Refer to the owner’s manual that came with your tripod for more information. ■ Do not overtighten the tripod mount screw.
Installing Permanently 54 User’s Guide
6 Fixing Problems This chapter describes potential problems and offers suggestions to help correct them. ■ “Troubleshooting Suggestions” on page 55 ■ “Testing the Projector” on page 63 Troubleshooting Suggestions To use this section, find the problem statement that is closest to your problem, then try each bulleted item one at a time until your problem is fixed. If the suggestions do not solve your problem, contact HP. See the Support Guide included with the projector.
Fixing Problems Start-up problems If no lights or sounds turn on: ❏ Be sure that the power cable is securely connected to the projector and the other end is plugged into an outlet with power. ❏ Press the power button again. If nothing is projected but the projector seems to start up: ❏ Be sure the lens cover is open. ❏ If the lamp indicator is on or blinking, unplug the projector after it cools down. Remove and reinstall the lamp module. If this does not fix the problem, install a new lamp.
Fixing Problems Picture problems If the image is not displayed on the screen, but the HP startup screen is displayed: ❏ Press the source button on the projector or remote control. ❏ Turn off or disable the notebook or desktop computer screen saver function. ❏ For a computer connection, ensure your notebook computer’s external video port is turned on. See the video port card shipped with the projector. On some notebooks, for example, press the Fn + F4 function keys to turn on the external video port.
Fixing Problems If the image is out of focus: ❏ Be sure the lens cover is open. ❏ While displaying the on-screen menu, adjust the focus ring. (The image size should not change; if it does, you are adjusting the zoom not the focus.) ❏ Ensure the projection screen is 1.2 to 12 m (4 to 40 ft) from the projector. ❏ For a computer connection, set the display resolution on the computer to 1024 x 768 pixels.
Fixing Problems If a scrolling or cut-off image is displayed: ❏ Press the auto sync button on the projector or remote control. ❏ For a computer connection, turn everything off, then power on the projector first and power on the notebook or desktop computer second. ❏ For a computer connection, if the above steps do not correct the display image, adjust the resolution of the notebook or desktop computer to 1024 x 768 pixels.
Fixing Problems If the projected colors seem slightly wrong: ❏ If the video button on the projector is not lit, try pressing the video button on the projector or the picture mode button on the remote control. ❏ Open the on-screen menu and select Adjust picture > Color settings. Adjust the color settings as needed. ❏ Open the on-screen menu and select Adjust picture > Color Settings > Color space. Change the selection. ❏ Open the on-screen menu and select Help > Diagnostics. Run color tests.
Fixing Problems Sound problems If no sound is coming out of the projector: ❏ Be sure you have an audio cable securely connected between the projector and the input device. ❏ Be sure that the mute and volume settings are correct on the input device, such as a computer, DVD player, or camcorder. ❏ Open the on-screen menu and select Quick choice. Check the following settings: ◆ Mute is turned off. ◆ Volume is correct.
Fixing Problems If the lamp shuts off during a presentation: ❏ A minor power surge might cause the lamp to shut off. Wait a few minutes, then power on the projector. ❏ If the lamp indicator is on or blinking, unplug the projector after it cools down. Remove and reinstall the lamp module. If this does not fix the problem, install a new lamp.
Fixing Problems Testing the Projector The on-screen menu contains diagnostic tests you can use to verify the proper operation of the projector and the remote control. To run the projector diagnostics 1. Open the on-screen menu and select Help > Diagnostics. 2. Select a test to perform.
Fixing Problems 64 User’s Guide
7 Reference This chapter lists the specifications, safety information, and regulatory information for the projector. ■ “Specifications” on page 65 ■ “Safety Information” on page 70 ■ “Regulatory Information” on page 72 Specifications Because HP continually improves its products, the following specifications are subject to change. For the latest specifications, visit the HP website at http://www.hp.com. Identifying the projector specifications Size 251 mm × 210 mm × 69 mm (9.9 in. × 8.3 in. × 2.7 in.
Reference Identifying the projector specifications (continued) Lens 2.0 to 2.4 throw ratio (distance/width) Optical zoom 1:1.2 Keystone Manual correction: up to +25° to –30° vertical Audio Monaural speaker, 1-W peak output Lamp 200-W P-VIP lamp, 1.0-mm arc 2000 hours (half life) Lamp-saver mode reduces lamp power to 160 W, extends lamp life Replacement lamp: L1720A Light engine 0.7-in.
Reference Identifying the projector specifications (continued) Noise level 38±2 dBA Environment Operating: Temperature: 10 to 35°C (50 to 95°F) Humidity: 80% RH max, non-condensing Altitude: up to 3,000 m (10,000 ft), up to 25°C (77°F) Storage: Temperature: –20 to 55°C (–4 to 131°F) Humidity: 80% RH max, non-condensing Altitude: up to 12,000 m (40,000 ft) User’s Guide 67
Reference Analog Video Mode Compatibility Compatibility Resolution V-Sync (Hz) H-Sync (kHz) VGA 640 x 350 70 31.5 640 x 350 85 37.9 640 x 400 85 37.9 640 x 480 60 31.5 640 x 480 72 37.9 640 x 480 75 37.5 640 x 480 85 43.3 720 x 400 70 31.5 720 x 400 85 37.9 800 x 600 56 35.2 800 x 600 60 37.9 800 x 600 72 48.1 800 x 600 75 46.9 800 x 600 85 53.7 1024 x 768 60 48.4 1024 x 768 70 56.5 1024 x 768 75 60.0 1024 x 768 85 68.7 1280 x 1024 60 63.
Reference Analog Video Mode Compatibility (continued) Compatibility Resolution V-Sync (Hz) H-Sync (kHz) MAC II 13 640 x 480 66.68 35 MAC 16 832 x 624 74.55 49.725 MAC 19 1024 x 768 75 60.24 MAC 1152 x 870 75.06 68.68 MAC G4 640 x 480 60 31.35 MAC G4 640 x 480 120 68.03 MAC G4 1024 x 768 120 97.09 i Mac DV 640 x 480 117 60 i Mac DV 800 x 600 95 60 i Mac DV 1024 x 768 75 60 i Mac DV 1152 x 870 75 68.
Reference Safety Information Safety precautions Å WARNING: Observe the following precautions to reduce the risk of injury. 70 ■ To prevent eye injury, do not look directly into the lens when the lamp is on. ■ To prevent electrical shock, do not expose the projector to rain or moisture. Do not open the projector except as instructed by the manual. ■ To reduce the risk of fire or electrical shock, do not allow small metallic objects to get inside the projector.
Reference LED safety The infrared ports located on the digital projector and remote control are classified as Class 1 LED devices according to International Standard IEC 825-1 (EN60825-1). This device is not considered harmful, but the following precautions are recommended: ■ If the unit requires service, contact an authorized HP service center. ■ Do not attempt to make any adjustment to the unit. ■ Avoid direct eye exposure to the infrared LED beam.
Reference Regulatory Information This section presents information that shows how your digital projector complies with regulations in certain regions. Any modifications to your digital projector not expressly approved by HP could void the authority to operate the digital projector in these regions. U.S.A. This digital projector has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Reference Japan Korea User’s Guide 73
Reference International For regulatory identification purposes, your product is assigned a regulatory model number. The regulatory model number for your product is listed in the declaration of conformity. This regulatory number is different from the marketing name and product number. Manufacturer's Name: Manufacturer's Address: DECLARATION OF CONFORMITY According to ISO/IEC Guide 22 and EN 45014 Hewlett Packard Company Hewlett Packard Company Digital Projection & Imaging 1000 NE Circle Blvd.
Index A accessories listing 14 adjust picture 34 aiming the projector raising and lowering 26 analog video mode compatibility 68 audio adjusting 34 B back panel identifying 12 buttons projector 11 remote control 13 C ceiling installation setting up 50 component video connection connecting video source 23 composite video connection connecting video source 22 configuration using on-screen menu 37 connecting input sources component video connection 23 composite video connection 22 computer with VGA port 1
Index see ceiling installation see rear projection installation see table installation K Kensington lock 53 keystone correction adjusting 33 L lamp module replacing 44 lamp saver mode 35 language changing 35 LED safety precautions 71 lens care 44 cleaning 44 lights identifying 11 location see ceiling installation see rear projection installation see table installation lock 53 M maintenance routine maintenance 43 menu see on-screen menu O on-screen menu about menu definitions 42 adjust picture menu
Index precautions 70 SCART device 21 security locking 53 setup adjusting 35 see also ceiling installation see also rear projection see also table installation slanted picture see keystone correction sound see audio source changing 32 specifications of the projector 65 status of projector 43 S-video connection connecting video source 21 testing diagnostics 63 tripod mounting on 53 troubleshooting interruption problems 61 picture problems 57 remote control problems 62 sound problems 61 start-up problems 56
Index Index 78 User’s Guide
