VISTA Plus for MPE User's Guide

Viewing a Report
3-23
Downloading With Advance Link
Since VISTA cannot automatically detect the presence of the Advance Link terminal emulator, a
JCW must be set to notify VISTA of Advance Link. Use the following JCW set to the value of one
prior to downloading the report: SETJCW ADVLINK,1.
A command file with the following commands must also be present on the PC that is executing
Advance Link:
&hp3000 on
&hostcontrol 126
&hostcopy “run monitor.pub.sys”
When you invoke Advance Link, you also need to specify the command file with the Advance Link
command, ADVLINK commands.apc. This loads commands and enables execution of file transfers.