Configuring and Managing Host-Based X.25 Links - Edition 5 (36939-90054)

Chapter 7 135
Managing Networks with DTCCNTRL
DTCCNTRL Parameters
STARTPADSUP Activates PAD support services on the
specified card. X.25 services must
already be active.
STARTBOTH Activates both X.25 and PAD support
services on the specified card.
STOPX25 Deactivates X.25 services on the
specified card. If PAD support services
are active, they must be deactivated
prior to entering this command.
STOPPADSUP Deactivates PAD support services on
the specified card. X.25 services remain
active.
STOPBOTH Deactivates both X.25 and PAD support
services on the specified card.
STATUS Displays information about the DTC,
including type (16, 48 or 72MX), X.25
cards, and whether X.25 or PAD
support is active on the cards.
CARD=cardnum Required if FUNC is one of STARTX25,
STARTPADSUP, STARTBOTH, STOPX25,
STOPPADSUP, or STOPBOTH. Specifies the X.25
card number on which the FUNC operation is to be
performed.
FORCED=foption Optional. If FUNC is SHUTDOWN specifies
whether all active ldevs will be aborted. If FUNC is one
of STARTX25, STARTPADSUP, STARTBOTH,
STOPX25, STOPPADSUP or STOPBOTH. Specifies
whether the operation will be performed even if
another user is accessing the DTC Manager.
N Default. If FUNC is SHUTDOWN,
DTS shutdown is notattempted ifthere
are active ldevs. If FUNC is a PAD or
X.25 support service, the function is not
performed if another user is accessing
the DTC Manager.
Y If FUNC is SHUTDOWN, causes all
active ldevs to be aborted on DTS
shutdown. For shutdown, this option
can only be invoked from the command
line. If FUNC is a X.25 or PAD support
function forces the X.25 or PAD support
function to occur even if another user is
accessing the DTC Manager.