Configuring and Managing Host-Based X.25 Links - Edition 5 (36939-90054)

138 Chapter7
Managing Networks with DTCCNTRL
Dynamic Configuration
Table 7-1 Dynamically Configurable Tasks
Task
Action Required for Change to Become
Active
Add/configure new terminal/printer
Add/delete class name
Change DTC event logging class
Host-based X.25 configuration changes:
• maximum number of PAD connections
• X.25 link name
• remote X.25 addresses and security
• X.25 allow access
• remote X.25 calling address
• PAD password
Change SNMP filter
Change NLIO from N to Y in terminal profile
Increase number of non-nailed TIO/PAD ports
No action; changes take effect dynamically
Change terminal to printer or vice versa*
Change device profile characteristics:
• change line speed
• change term type file name/number
• change modem type
• change speed/parity
• change hardware handshaking
• change reset HP terminal
• change allow :HELLO logon
• change record width
Delete:
• terminal/printer*
• ldev*
• DTC*
Decrease number of non-nailed TIO/PAD ports*
Logoff any sessions or close any jobs associated
with changed devices. If device is a printer,
stop the spooler.
* For these changes, the device must not be
owned when dynamic configuration is invoked.
The terminals must be logged off and the
printers must be not spooled.