Configuring and Managing Host-Based X.25 Links - Edition 5 (36939-90054)

Appendix A 175
Error Messages
DCC Error Messages
DCC WARNING P-L, Configuration file close error SSSSSSSS.
(DCCWARN=21)
(DCCERR 21) Cause: A problem occurred while closing the NMCONFIG.PUB.SYS file
or the NMCONFIX.PUB.SYS file.
Action: Check that the files exist, and that adequate disk space is
available for them. If the files exist and the disk space is large enough,
check for file system or hardware problems.
NLIO status SSSSSSSS, ldev LLL) (DCCERR=22)
(DCCERR 22) Cause: A problem exists in the NLIO services.
Action: Contact your Hewlett-Packard support representative.
DCC ERROR P-L, Blank NODENAME. (DCCERR=23)
(DCCERR 23) Cause: A host node name was not configured.
Action: Configure a host node name.
DCC ERROR P-L, Configuration file not validated, status SSSSSSSS.
(DCCERR=24)
(DCCERR 24) Cause: Either modifications were made to the network management
configuration file and the file was not validated, or the file was
validated but the errors listed to the console were not corrected.
Action: Either validate the network management configuration file,
or correct the errors listed to the console when the file was first
validated and then revalidate the file.
DCC ERROR P-L, X.25 Level 1&2 not configured in NMMGR, status
SSSSSSSS. (DCCERR=25)
(DCCERR 25) Cause: Level 1&2 of the X.25 network management structure have not
been configured in NMMGR.
Action: Supply the required information in the X.25 Level 1&2 screen
in NMMGR.
DCC ERROR P-L, X.25 Level 3 not configured in NMMGR, status
SSSSSSSS (DCCERR=26)
(DCCERR 26) Cause: Level 3 of the X.25 network management structure have not
been configured in NMMGR.
Action: Supply the required information in the X.25 Level 3 screen in
NMMGR.
DCC ERROR P-L, Invalid card number specified, (DCC status
SSSSSSSS, card number = cardnumber). (DCCERR=27)
(DCCERR 27) Cause: You have specified an invalid card number for the DTC type.