Configuring and Managing Host-Based X.25 Links - Edition 5 (36939-90054)

Appendix A 183
Error Messages
DTCCNTRL Error Messages
Action: None. If attempting to control X.25 operation on a PC-based
system, refer to the documentation for PC-based networks.
Missing parameter: CARD not specified. (CTLERR 05)
CTLERR 05 Cause: The DTCCNTRL command was issued with a FUNC parameter
that requires a card number, but no CARD parameter was specified. The
STARTX25, STARTPADSUP, STARTBOTH, RC, STOPX25, STOPPADSUP,
and STOPBOTH functions all require the CARD parameter. CARD is
optional only for the STATUS function.
Action: Reissue the command with the correct card number specified
in the CARD parameter.
This DTC doesn’t contain X25 cards. (CTLERR 06)
CTLERR 06 Cause: A DTCCNTRL command was issued specifying the DTC name of
a DTC that does not contain any X.25 iX Network Access cards.
Action: Obtain the correct DTC name for the DTC containing the X.25
iX Network Access card and reenter the command using the correct
DTC specification.
DTC not accessible. Use FORCED option. (CTLERR 07)
CTLERR 07 Cause: The DTCCNTRL command was issued at a time when another
user had exclusive access to the DTC (for example, TermDSM was
running).
Action: Either reissue the DTCCNTRL command using the FORCED
option to force access to the DTC or wait until the DTC is no longer
being exclusively accessed.
Non-existing DTC. (CTLERR 08)
CTLERR 08 Cause: A DTCCNTRL command was issued for a DTC that is not
configured for the host system.
Action: Reissue the command with a correct DTC name specified in
the DTC parameter.
Invalid card number. (CTLERR 09))
CTLERR 09 Cause: A DTCCNTRL command was issued with an out-of-range card
number specified in the CARD parameter.
Action: Reenter the command with a valid DTC card number. For a
DTC 16, the card number must be 2. For a DTC 48, the card number
must be between 1 and 5.
Stop PAD first. (CTLERR 10)
CTLERR 10 Cause: An attempt was made to stop X.25 services prior to PAD
services being stopped. PAD services must be stopped first.
Action: Issue a DTCCNTRL command with a function of STOPBOTH to
stop both X.25 and PAD services.