Configuring and Managing Host-Based X.25 Links - Edition 5 (36939-90054)

Chapter 3 51

Conﬁguring DTCs Step-by-Step

Modify the Network Management Conﬁguration File

Figure 3-2 Main Screen

1. Assign a node name to the HP 3000 host in the “Local HP 3000

node name” ﬁeld. Use the format nodename.domain.organization.

If your HP 3000 host is the only computer in your network, you may

enter any node name. If you have several computers on your

network, you must make sure the node names for each host are

unique.

2. In the ﬁeld after the question, “Are you using the OpenView

DTC Manager?”, enter an N.

This means that you will not use the OpenView DTC Manager (that

is, use a PC to manage your DTCs).

Instead, you will use the HP 3000 host to manage your DTCs. If you

specify “Y” for using OpenView DTC Manager refer to the

Conﬁguring Systems for Terminals, Printers, and Other Serial

Devices manual.

3. In the ﬁeld after the question, “Do you have X.25

system-to-system or PAD connections?”, enter an Y for yes.

4. After you enter the information on the screen, press the

[Save Data]

function key to save your entries.

5. After the data is saved (the Data ﬂag in the upper right-hand corner

is Y), press the

[DTS] function key.