Configuring and Managing Host-Based X.25 Links - Edition 5 (36939-90054)

56 Chapter3
Configuring DTCs Step-by-Step
Modify the Network Management Configuration File
Non-nailed PAD
terminal profile
name The terminal profile that will be used for all non-nailed
PAD connections accepted by the system. PAD
terminals must use a profile that defines the terminal
type as terminal type 24.
Step 5: Select DTC Type
The DTC Configuration Selection screen (Figure 3-4) is displayed when
you press the
[Go To DTC] key at the Host Configuration screen. Here
you specify the type of DTC to configure.
Figure 3-4 DTC Configuration Selection Screen
1. Select the DTC type by pressing one of the function keys:
[DTC16iX],
[DTC16MX/RX], [DTC16], [DTC48], or [DTC72MX].
NMMGR will take you to the configuration screen for the specified
DTC type.
NOTE You may use the [List DTCs] key on the DTC Configuration Selection
screen to see a list of all DTC names configured on your system.