MPE/iX System Utilities Reference Manual (32650-90908)
UPSUTIL for MPE/iX
UPSUTIL Commands
Chapter 32
237
UPSUTIL Commands
UPSUTIL’s command set is defined and explained in this section. Each command is fully described, including:
• command name
• command purpose/function
• command syntax
• UPSUTIL’s operation in response to the command
• information displayed by UPSUTIL for the command’s execution
• normal (no-error) operation of the command
• possible errors in command execution, and error messages
Actual examples of the terminal screen displays produced by invoking UPSUTIL commands.
HELP Command
The HELP command merely displays a “menu” of UPSUTIL commands, as an online documentation aid to
users of UPSUTIL.
Syntax
help
Example
--------------------------------------------------------------------------
UPSUTIL: Command > help
--------------------------------------------------------------------------
UPSUTIL Program: Commands available are as follows:
(There are no parameters for any of the commands.
At the prompt, just type the command name. )
Cmd Name: Command Function:
~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
help - Show this menu of commands.
exit Done, exit the program.
config - Show system configuration of UPS devices.
newconfig - Change to a new UPS Monitor config file.
start - Start the System UPS Monitor process.
stop - Stop the System UPS Monitor process.
restart - Restart (stop, then start) the UPS Monitor process.
resetpfail - Reset (clear) UPS Monitor’s information about the