NS3000/iX Error Messages Reference Manual (36923-90043)

11
Preface
This manual contains most messages and errors generated by
NS 3000/iX subsystems.
What if the Error
is Not in this
Manual
If you have encountered an error that is not in this manual, here are
some ideas on how you might find the errors:
• If it is an NMMGR error, or error from any of the Node Management
Services Utilities, refer to Appendix A in the Using the Node
Management Services (NMS) Utilities manual.
• If you have PCs using NS to connect to the MPE/iX system, consult
the terminal emulator or networking manuals for your PC software
for the error.
• If you cannot find the error at all, submit a CR and call your
Hewlett-Packard Representative, see Appendix A , “Submitting a
CR.”
Special Note MPE/iX, Multiprogramming Executive with Integrated POSIX, is the
latest in a series of forward-compatible operating systems for the
HP e3000 line of computers. In HP documentation and in talking with
HP e3000 users, you will encounter references to MPE XL, the direct
predecessor of MPE/iX. MPE/iX is a superset of MPE XL. All programs
written for MPE XL will run without change under MPE/iX. You can
continue to use MPE XL system documentation, although it may not
refer to features added to the operating system to support POSIX.