NS3000/iX Error Messages Reference Manual (36923-90043)

116 Chapter12
NETXPORTERR Error Messages
2000 MESSAGE: TRACE FILE IS !.
CAUSE: Informative message.
ACTION: None.
4000 MESSAGE: TOO MANY PARMS IN COMMAND LINE.
CAUSE: Certain NETCONTROL functions and entities are mutually
exclusive and cannot be combined on the same command line. Multiples
of the same function are not allowed.
ACTION: Check the NS 3000/iX Operations and Maintenance
Reference Manual for proper syntax. Correct and retry.
4002 MESSAGE: EXPECTED STATUS KEYWORD ALL.
CAUSE: Typographical error.
ACTION: Type the word ALL after STATUS =. Correct and retry.
4003 MESSAGE: EXPECTED SEMICOLON.
CAUSE: Typographical error. There must be a blank between
NETCONTROL and the first entity or function on the command line. All
following entities or functions must be separated by semicolons.
ACTION: Check the NS 3000/iX Operations and Maintenance
Reference Manual for proper syntax. Correct and retry.
4004 MESSAGE: INVALID NETCONTROL KEYWORD: EXPECTED START
STOP, TRACEON, TRACEOFF, MONON, MONOFF, STATUS, VERSION,
NET, GATE, OR NI.
CAUSE: Only the keywords listed are allowed.
ACTION: Check the NS 3000/iX Operations and Maintenance
Reference Manual for proper syntax. Correct and retry.
4006 MESSAGE: EXPECTED EQUAL.
CAUSE: For TRACEON=Type, the type is a required parameter, one of
H,D,M,B,N,S.
ACTION: Check the NS 3000/iX Operations and Maintenance
Reference Manual for proper syntax. Correct and retry.
4007 MESSAGE: EXPECTED LINK NAME.
CAUSE: No link name follows the ADDLINK= or DELLINK= keyword.
ACTION: Reissue the NETCONTROL ADDLINK or DELLINK command with
the appropriate link name.
4008 MESSAGE: KEYWORD SPECIFIED REDUNDANTLY.
CAUSE: Certain NETCONTROL functions and entities are mutually
exclusive and cannot be combined on the same command line. Multiples
of the same function are not allowed.