NS3000/iX Error Messages Reference Manual (36923-90043)

Chapter 12 119
NETXPORTERR Error Messages
ACTION: Reissue the NETCONTROL command using only one of the
keywords.
4033 MESSAGE: NO FUNCTION KEYWORDS ENTERED.
CAUSE: User typed an illegal command. Specifying an entity requires a
function to act on it.
ACTION: Check NS 3000/iX Operations and Maintenance Reference
Manual for proper syntax. Correct and retry.
4034 MESSAGE: TRACE PREVIOUSLY ENABLED.
CAUSE: Informative message.
ACTION: None.
4035 MESSAGE: ENTITY WAS NOT TRACING.
CAUSE: Informative message.
ACTION: None.
4040 MESSAGE: VERSION ERROR: FIX NUMBERS DIFFER.
CAUSE: Network Transport software module version numbers do not
match.
ACTION: Issue the NETCONTROL VERSION=MOD command to see which
numbers do not match, then see Appendix A , “Submitting a CR,” of this
manual.
4041 MESSAGE: VERSION ERROR: UPDATE NUMBERS DIFFER.
CAUSE: Network Transport software module version numbers do not
match.
ACTION: Issue the NETCONTROL VERSION=MOD command to see which
numbers do not match, then see Appendix A , “Submitting a CR,” of this
manual.
4042 MESSAGE: VERSION ERROR: VERSION NUMBERS DIFFER.
CAUSE: Network Transport software module version numbers do not
match.
ACTION: Issue the NETCONTROL VERSION=MOD command to see which
numbers do not match, then see Appendix A , “Submitting a CR,” of this
manual.
4043 MESSAGE: VERSION ERROR: MISSING REQUIRED MODULE (S).
CAUSE: Either missing software module or possible internal error.
ACTION: Issue the NETCONTROL VERSION=MOD command to find out
which module is missing.