NS3000/iX Error Messages Reference Manual (36923-90043)

128 Chapter13
NSCONTROL Error Messages
656 MESSAGE: UNKNOWN SERVER servername.
CAUSE: An NSCONTROL command with a SERVER option was issued; the
indicated server name is not a defined service.
ACTION: Delete or correct the name and reissue the command. The
NSCONTROL STATUS=SERVERS command will display the valid server
names.
657 MESSAGE: SERVER pin DOES NOT SUPPORT DEBUG.
CAUSE: An NSCONTROL command with a DEBUG=pinin option was
issued, but the server selected by pin does not support the DEBUG option.
ACTION: Correct the pin and reissue the command, or ignore.
658 MESSAGE: PROCESS pin NOT A SERVER.
CAUSE: An :NSCONTROL command with a DEBUG=pin option was issued,
but the pin is not a server process.
ACTION: Correct the pin and reissue the command, or ignore.
659 MESSAGE: MINIMUM SERVER NUMBER MAXIMUM SERVER
NUMBER FOR servername.
CAUSE: An NSCONTROL command was issued with a SERVER option that
changes the minimum and/or maximum number of servers, so that the
minimum number of servers is greater than the maximum.
ACTION: Correct the SERVER option and reissue the command. The
NSCONTROL STATUS=SERVERS command will show the current minimum
and maximum server limits for the server type.
660 MESSAGE: TOTAL MINIMUM SERVER NUMBERS MINIMUM PROCESS
LIMIT.
CAUSE: An :NSCONTROL command was issued with a SERVER option that
changes the minimum number of servers for one or more server types,
so that the total number of previously created servers exceeds the
minimum process limit. The minimum process limit prevents
previously created servers from taking up too many processes and
hindering other applications on the system.
ACTION: Adjust the minimum number of servers to fit within the
minimum process limit.
661 MESSAGE: MISSING DADCONF.NET.SYS CONFIGURATION FILE.
CAUSE: To be determined.
ACTION: Check that the JCONFJOB job has been streamed. If not, issue
the command STREAM JCONFJOB.