NS3000/iX Error Messages Reference Manual (36923-90043)

136 Chapter14
VALERR and VALWARN Messages
46 MESSAGE: NOT A VALID LOGGING CLASS FOR SUBSYSTEM 3.
CAUSE: Some other configuration record besides CLAS0001 through
CLAS0006 exists beneath the LOGGING.SUB0003 record of the
configuration file.
ACTION: Use the NMMGR utility to change the configuration file so
that the only records beneath the LOGGING.SUB0003 path are
CLAS0001 through CLAS0006. Validate the Network Transport again.
49 MESSAGE: IP NODE ADDRESS CANNOT EQUAL ZERO.
CAUSE: The node number portion of an IP internet address in the
specified configuration file record is equal to zero.
ACTION: Use the NMMGR utility to change the node number portion of
the offending IP internet address to be a non-zero value. Validate the
Network Transport again.
50 MESSAGE: INTERNET IP ADDRESS CANNOT EQUAL NI IP ADDRESS.
CAUSE: The node number portion of the gateway IP internet address in
the specified configuration file record is the same as the network’s local
IP internet address node number.
ACTION: Use the NMMGR utility to change the local node number or
gateway number so that they are no longer equal. Validate the Network
Transport again.
100 MESSAGE: SUBSYSTEM 4 LOGGING NOT CONFIGURED.
CAUSE: The LOGGING.SUB0004 record does not exist in the configuration
file.
ACTION: Use the NMMGR utility to add the LOGGING.SUB0004 record
to the configuration file so that logging for the DC/LDM will be
configured. At this time logging class 0 should also be added to the
LOGGING.SUB0004 screen. Validate the Network Transport again.
101 MESSAGE: LOGGING CLASS ZERO NOT CONFIGURED FOR
SUBSYSTEM 4.
CAUSE: There is no class zero logging configured for the DC/LDM
beneath the LOGGING.SUB0004 path in the configuration file.
ACTION: Use the NMMGR utility to add in configuration record
CLAS0000 so that all logging is configured for the DC/LDM. Validate
the Network Transport again.
102 MESSAGE: SUBSYSTEM 5 LOGGING NOT CONFIGURED.
CAUSE: The LOGGING.SUB005 record does not exist in the configuration
file.
ACTION: Use the NMMGR utility to add the LOGGING.SUB0005 record
to the configuration file so that logging for NetIPC will be configured. At
this time logging classes 0 through 2 should also be added to the