NS3000/iX Error Messages Reference Manual (36923-90043)

156 Chapter15
LAN, LAN/Console, Token Ring LAN Error Messages
125 MESSAGE: The driver detects unknown option in the 802.2 control
field of a test or xid packet.
CAUSE: The problem is caused by a bad packet.
ACTION: If this error appears repeatedly, write down the error
information displayed on the console and call your Hewlett-Packard
representative.
128 MESSAGE: The CIO LAN configuration request failed.
CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard representative.
129 MESSAGE: The CIO LAN statistics request failed.
CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console,
submit an CR and call your Hewlett-Packard representative.
130 MESSAGE: The CIO LAN reset statistics request failed.
CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console,
submit an CR and call your Hewlett-Packard representative.
131 MESSAGE: The CIO LAN card reports Dead-or-Dying ARQ status.
CAUSE: The problem is caused by bad CIO LAN card hardware.
ACTION: Your Hewlett-Packard representative must run diagnostics on
the CIO LAN card.
132 MESSAGE: The CIO LAN card reports Protocol Error ARQ.
CAUSE: Violation of the CIO LAN card backplane protocol.
ACTION: Your Hewlett-Packard representative must run diagnostics on
the CIO LAN card.
133 MESSAGE: The CIO bottom plane received invalid request at a given
state.
CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard representative.
135 MESSAGE: The CIO LAN card hard reset request failed.
CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard representative.