NS3000/iX Error Messages Reference Manual (36923-90043)

Chapter 15 161
LAN, LAN/Console, Token Ring LAN Error Messages
ACTION: Write down the error information displayed on the console and
call your Hewlett-Packard representative.
242 MESSAGE: Could not get Write Initiator label.
CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console and
call your Hewlett-Packard representative.
243 MESSAGE: Could not release Write Initiator label.
CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console and
call your Hewlett-Packard representative.
244 MESSAGE: Could not open NML Gxxxx.PUB.SYS file.
CAUSE: The indicated log file may be opened with exclusive access.
ACTION: Wait for the program or process that has the log file opened
exclusively to close it.
CAUSE: The driver subsystem is not configured in logging configuration.
ACTION: Use NMMGR to check logging configuration for subsystem 25
or write down the error information displayed on the console and call
your Hewlett-Packard representative.
245 MESSAGE: Could not close the NMLGxxxx.PUB.SYS file.
CAUSE: Invalid LOG ID due to configuration data corruption in the
driver's PDA.
ACTION: Write down the error information displayed on the console,
submit an CR, take a system dump and call your Hewlett-Packard
representative.
246 MESSAGE: Could not freeze the configuration record in memory.
CAUSE: Memory shortage problems are occurring.
ACTION: Write down the error information displayed on the console and
call your Hewlett-Packard representative.
247 MESSAGE: Could not unfreeze the configuration record in memory.
CAUSE: Memory problems are occurring.
ACTION: Write down the error information displayed on the console and
call your Hewlett-Packard representative.
248 MESSAGE: Could not send config request message.
CAUSE: An internal system ports problem has occurred.
ACTION: Write down the error information displayed on the console and
call your Hewlett-Packard representative.