NS3000/iX Error Messages Reference Manual (36923-90043)

Chapter 16 167
100VG-AnyLAN and HP-PB 100Base-T Error Messages
SDI Generic Status Values
Driver’s resources).
ACTION: According to the subsystem.
85 ($55) MESSAGE: Resource deallocation error.
CAUSE: For the error shutdown handling, all SAPs and all associated
link stations are deallocated, and the driver is deconfigured.
ACTION: None
86 ($56) MESSAGE: One or more still active resources were deallocated.
CAUSE: For the error shutdown handling, all SAPs and all associated
link stations are deallocated, and the driver is deconfigured.
ACTION: None
87 ($57) MESSAGE: Link is already active.
CAUSE: The Driver is already configured.
ACTION: According to the subsystem.
121 ($79) MESSAGE: A requested feature is not supported by this link.
CAUSE: Feature is not supported/implemented. This might be the result
of subsystem “probing” the capability of the driver (example,
Connection oriented subsystem over a datagram service).
ACTION: None
122 ($7A) MESSAGE: A requested option is not supported by this link.
CAUSE: The Driver understands the option that user requested,
however, it does not support the option.
ACTION: Check Driver ES and make sure you talk to the right Driver.
123 ($7B) MESSAGE: Link was expecting optional parameters but they were
missing.
CAUSE: The Driver was expecting some driver specific information, the
driver may or may not be configurated (for some drivers, this
information may be considered critical; and for some other drivers, this
information may be considered optional).
ACTION: According to the subsystem.
124 ($7C) MESSAGE: Link did not understand the optional parameters supplied.
CAUSE: The Driver did not understand the optional parameter in the
request message.
ACTION: Check Driver ES and make sure you talk to the right Driver.
125 ($7D) MESSAGE: Link type of the named link is not supported.
CAUSE: The Linkname passed by the Module Configuration Call or
Deconfigurator Call is invalid. The particular driver is not configured.