NS3000/iX Error Messages Reference Manual (36923-90043)

26 Chapter1
CIERR Error Messages
ACTION: See Appendix A , “Submitting a CR,” of this manual.
5106 MESSAGE: NO NFT SERVERS ARE CURRENTLY AVAILABLE.
CAUSE: Maximum allowable limit of NFT Servers reached on system.
ACTION: Wait until fewer DSCOPY applications are running on the
system, or ask the system manager to raise the maximum allowable
limit of NFT Servers (via the NSCONTROL command). Try again.
5400 MESSAGE: NSCONTROL COMMAND ERROR.
CAUSE: NSCONTROL error found. A previously printed error message
should be more specific.
ACTION: Refer to the ACTION for the previously displayed error
message.
5401 MESSAGE: DSLINE COMMAND ERROR.
CAUSE: DSLINE error found. A previously printed error message should
be more specific.
ACTION: Refer to the ACTION for the previously displayed error
message.
5402 MESSAGE: REMOTE COMMAND ERROR.
CAUSE: REMOTE error found. A previously printed error message should
be more specific.
ACTION: Refer to the ACTION for the previously displayed error
message.
5501 MESSAGE: RESOURCE ERROR — COULD NOT GET DST.
CAUSE: Internal resource error.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
5502 MESSAGE: LIST IS INCOMPLETE — RESOURCE ERROR.
CAUSE: Internal resource error.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
5503 MESSAGE: INTERNAL DS ERROR — SERVER TERMINATED.
CAUSE: Internal resource error.
ACTION: Try the command again. If it fails again submit an CR See
Appendix A , “Submitting a CR.”
5504 MESSAGE: INTERNAL ERROR — COULD NOT STORE VTTM ID IN
DSTABLE.
CAUSE: Internal resource error.
ACTION: If this happens while running a program, prep or link the
program with more stack space. If this happens after typing a