NS3000/iX Error Messages Reference Manual (36923-90043)

446 Chapter20
LAP-B Link Error Messages
LAP-B Link Driver Error Messages
1016 MESSAGE: Attempt to download to a bad card address.
CAUSE: Possible causes for this problem are as follows:
1. The download file is corrupt.
2. There is an incorrect version of the download file.
ACTION: Possible actions for this problem are as follows:
1. Replace the download file from your latest system update tape.
2. Check the version of the download file with NMMAINT and call your
Hewlett-Packard representative if incorrect.
1017 MESSAGE: PSI reported an undefined error during download.
CAUSE: Internal error.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard representative.
1018 MESSAGE: PSI detected a severe internal error.
CAUSE: Internal error.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard representative.
1019 MESSAGE: PSI detected a severe error on the backplane.
CAUSE: Internal error.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard representative.
1020 MESSAGE: PSI reported an unknown severe error type.
CAUSE: Internal error.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard representative.
1023 MESSAGE: Unable to obtain IODC information from
IO_GET_MODULE_REC during initialization.
CAUSE: Internal error.
ACTION: Write down the error information displayed on the console,
submit an CR, and call your Hewlett-Packard representative.
1024 MESSAGE: Unsupported module type in IODC.
CAUSE: Possible causes for this problem are as follows:
1. Bad PSI hardware.
2. Wrong path name is NMMGR.
3. Wrong card type.