NS3000/iX Error Messages Reference Manual (36923-90043)

Chapter 4 51
NFT/3000 Error Messages
ACTION: None.
38 MESSAGE: ! OVERRIDES PREVIOUS DATA TYPE.
CAUSE: Either BIN or ASC was specified when the other was already
specified in the command line or globally.
ACTION: None.
40 MESSAGE: INVALID FILE ID: !
CAUSE: Usually caused by blank characters in the file ID, or by omitting
a delimiter or parameter.
ACTION: Retype and reissue the command.
41 MESSAGE: INVALID NODE SPEC: !
CAUSE: Usually caused by blank characters in the node (or
environment) specification.
ACTION: Retype and reissue the command.
42 MESSAGE: INVALID DEVICE SPEC: !
CAUSE: Usually caused by blank characters in the device specification.
ACTION: Retype and reissue the command.
43 MESSAGE: CREATION OF IPC SOCKET FAILED.
CAUSE: Probable internal error.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
44 MESSAGE: NO LOGON FOR REMOTE ENVIRONMENT.
CAUSE: A node or environment was specified without a logon
specification and without a pre-existing remote session.
ACTION: Specify a logon string in the DSCOPY command line or perform
a DSLINE/REMOTE HELLO before issuing the DSCOPY command.
45 MESSAGE: ATTEMPT TO GET SOCKET ENDPOINT FAILED.
CAUSE: Probable internal error.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
46 MESSAGE: VARIABLE LENGTH RECORDS CANNOT BE DIRECTLY
ACCESSED.
CAUSE: The DIR option cannot be used on variable record files or with
the VAR option.
ACTION: Retry.
47 MESSAGE: BUFFER MANAGER ERROR.
CAUSE: Probable internal error.