NS3000/iX Error Messages Reference Manual (36923-90043)

52 Chapter4
NFT/3000 Error Messages
ACTION: See Appendix A , “Submitting a CR,” of this manual.
48 MESSAGE: ATTEMPT TO PLACE NFT SERVER BACK IN SYSTEM
ENVIRONMENT FAILED.
CAUSE: Probable internal error.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
49 MESSAGE: BUFFER MANAGER ERROR.
CAUSE: When an NFT process is initiated it attempts to place itself into
the appropriate user session (or job). The error results when this
attempt fails.
ACTION: Make sure that the sessions involving file transfer have not
been aborted. If the sessions are present, see Appendix A , “Submitting
a CR,” of this manual.
50 MESSAGE: INTERNAL ERROR — SEND QUEUE OVERFLOW.
CAUSE: Probable internal error.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
51 MESSAGE: SOURCE AND TARGET FILE ATTRIBUTES MUST MATCH.
CAUSE: For certain operations (such as overwrite) the attributes (data
type, file type) of both files involved must match. When they do not this
error results.
ACTION: If overwrite was attempted but the source and target files
aren't compatible, try using the replace option (REP); or use FCOPY to
copy the files.
52 MESSAGE: FSIZE SPEC IS IGNORED IF TARGET EXISTS.
CAUSE: The FSIZE option cannot be used with the OVER (overwrite) or
APP (append) option.
ACTION: None.
53 MESSAGE: INTERNAL ERROR — COMPLETION QUEUE OVERFLOW.
CAUSE: Internal error.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
54 MESSAGE: UNABLE TO OBTAIN DATA SEGMENT FOR INTERNAL
IPC.
CAUSE: Probable system resource problem.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
55 MESSAGE: UNABLE TO FIND AFT ENTRY FOR INTERNAL IPC.
CAUSE: Probable internal error.
ACTION: See Appendix A , “Submitting a CR,” of this manual.