NS3000/iX Error Messages Reference Manual (36923-90043)

Chapter 4 55
NFT/3000 Error Messages
74 MESSAGE: ERROR OCCURRED WHEN SETTING UP NFT SERVER.
CAUSE: Probable internal error.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
75 MESSAGE: NO NFT SERVERS ARE CURRENTLY AVAILABLE.
CAUSE: The number of active NFT servers (set via NSCONTROL) has
reached its limit.
ACTION: Adjust the maximum number of NFT servers allowed via
NSCONTROL. If this is not possible, try to invoke NFT again as a server
may have terminated.
76 MESSAGE: MESSAGE FILES MAY NOT BE TRANSFERRED IN
INTERCHANGE MODE.
CAUSE: MPE message files cannot be transferred using any of the
options which invoke interchange mode.
ACTION: Try the transfer again without any options which invoke
interchange mode.
77 MESSAGE: UNABLE TO OBTAIN PSEUDO-TERMINAL FOR LOGON.
CAUSE: All available pseudo-terminals are in use.
ACTION: If this happens often, ask the system manager to configure
more pseudo-terminals.
78 MESSAGE: NFT TERMINATION FAILED.
CAUSE: Probable internal error.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
79 MESSAGE: LOGON ID IS TOO LONG.
CAUSE: Usually a typographical error.
ACTION: Retype and reissue the command.
80 MESSAGE: NODE NAME IS TOO LONG.
CAUSE: Usually a typographical error.
ACTION: Retype and reissue the command.
81 MESSAGE: FILE PASSWORD IS TOO LONG.
CAUSE: Usually a typographical error.
ACTION: Retype and reissue the command.
82 MESSAGE: DEVICE NAME IS TOO LONG.
CAUSE: Usually a typographical error.
ACTION: Retype and reissue the command.