NS3000/iX Error Messages Reference Manual (36923-90043)

602 Chapter22
Logging Location Codes Continued
NETIPC Logging Location Codes
14 CLAS0000 MESSAGE: Internal
CAUSE: Unable to release timer.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
16 CLAS0000 MESSAGE: Internal error.
CAUSE: Unable to create port message pool.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
17 CLAS0000 MESSAGE: Internal error.
CAUSE: Call hpgetsysplabel failed.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
18 CLAS0000 MESSAGE: Internal error.
CAUSE: Call to convert_dst failed.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
19 CLAS0000 MESSAGE: Internal error.
CAUSE: Unable to alter port subqueue state.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
20 CLAS0000 MESSAGE: Internal error.
CAUSE: Failure in the call to NWTM procedure.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
21 CLAS0000 MESSAGE: Internal error.
CAUSE: Unable to get the pointer to file system data structure.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
22 CLAS0000 MESSAGE: Internal error.
CAUSE: Unable to set timer interval.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
23 CLAS0000 MESSAGE: Internal error.
CAUSE: Error in creating LSI.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
24 CLAS0000 MESSAGE: Internal error.
CAUSE: Unable to allocate a LSI.
ACTION: See Appendix A , “Submitting a CR,” of this manual.
25 CLAS0000 MESSAGE: Internal error.
CAUSE: Unable to allocate socket record.