NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

110 Chapter6
Point-to-Point (Router) Network Interface Configuration Screens
Point-to-Point Network Interface Links
Related screen:
• NETXPORT.NI.
NIname .MAPPING. mapentry
This screen allows up to 1024 mappings of
point-to-point links to destination nodes. If multiple
destinations are mapped to a single link, the link
must be configured as a shared dial (SD) link in the
current screen.
New name (Required only when renaming an existing
point-to-point link.) Enter a linkname.This new link
name is used in place of the current link name for an
existing link configuration. Remember, the link name
must be the same as the link name configured in the
Link Configuration: LAP-B Link Data screen.
The name can contain as many as eight alphanumeric
characters, and the first character must be alphabetic.