NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

118 Chapter6

Point-to-Point (Router) Network Interface Conﬁguration Screens

Neighbor Gateway Reachable Networks

The Neighbor Gateway Reachable Networks screen (#158) is used to

enter internet routing information. It supplies the internet address of a

neighbor internet gateway, lists addresses of remote networks which

are reachable through that gateway, and indicates the distances to

those remote networks. A neighbor gateway is a gateway node that

belongs to the same network as the node you are conﬁguring. This

means that the network portion of the internet address for the gateway

is the same as the network portion of the address you entered for the

network interface you are conﬁguring.

The screen, shown in Figure 6-12, is displayed when you select a

gateway name at the Neighbor Gateways screen (Figure 6-11) and

press the

[Add] or [Modify] function keys. It is also displayed when you type

the path name:

@NETXPORT.NI.

NIname

.INTERNET.

gatewayn

in the Command window of any screen and press the [Enter] key, where

NIname is a conﬁgured point-to-point NI, and gatewayn is the

conﬁgured point-to-point NI gateway name.

Figure 6-12 Neighbor Gateway Reachable Networks Screen

Press the

[Save Data] function key to transfer the data displayed on the

screen to the conﬁguration ﬁle you are creating or updating. Verify that

the data record has been created by checking that the Data ﬂag is set

to Y.