NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

158 Chapter7
X.25 Network Interface Configuration Screens
Neighbor Gateways
• To change the gateway name of an existing gateway, specify the
gateway name and a new name; then press the
[Rename] function key.
The previously configured name is replaced, and the screen displays
the new name in a display field under the label Configured
Gateways.
• To delete an existing gateway, specify the gateway name; then press
the
[Delete] function key. Press the [Delete] function key again to confirm
the deletion. The previously configured name is deleted and is no
longer displayed in a display field under the label Configured
Gateways.
From this screen you proceed to the screen used to configure network
numbers of all networks reachable from this gateway node.
Fields Gateway name Enter a name to represent a gateway on this X.25
network through which one or more remote networks
can be reached. A gateway name can contain as many
as eight alphanumeric characters; the first character
must be alphabetic. The gateway name is not the same
as the node name of the gateway, however you can use
the node name to make it easier to identify the gateway.
New name (Required only when renaming an existing
gateway.) Enter a gateway name to represent a
neighbor gateway. This new gateway name is used in
place of the current gateway name for an existing
gateway configuration. The name can contain as many
as eight alphanumeric characters. The first character
must be alphabetic.