NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

176 Chapter8

Token Ring Network Interface Conﬁguration Screens

Token Ring Network Interface Links

The Token Ring Network Interface Links screen (#90) in Figure 8-7 is

displayed when you press the

[Go To LINK] function key at the Token Ring

Network Interface Conﬁguration screen (Figure 8-3). It is also

displayed when you type the path name:

@NETXPORT.

NI.NIname

.LINK

in the command window of any screen and press the

[Enter] key, where

NIname is a conﬁgured token ring NI.

Figure 8-7 Token Ring Network Interface Links Screen

Use the ﬁelds and the function keys of this select screen to bind the

token ring NI to the link. Enter the link name in the Link name ﬁeld

and press the

[Save Data] key. (If you wish to rename the link, simply

enter the new name and press the

[Save Data] key.)

Fields

Link name Make sure this is the same link name conﬁgured at the

Token Ring Link Conﬁguration screen (#87) (path

name LINK). Press the

[Save Data] function key to save

the link name in the conﬁguration ﬁle. Verify that the

link name has been conﬁgured by checking that the

Data ﬂag is set to Y.