NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

222 Chapter10
100VG-AnyLAN Network Interface Configuration Screens
Neighbor Gateways
Neighbor Gateways
The Neighbor Gateways screen (#152) in Figure 10-9 is displayed when
you press the
[Go To INTERNET] function key at the VG100LAN Network
Interface Configuration screen (Figure 10-3). It is also displayed when
you type the path name:
@NETXPORT.NI.
NIname
.INTERNET
in the command window of any screen and press the
[Enter] key, where
NIname is a configured VG100LAN NI.
Figure 10-9 Neighbor Gateway Screen
Use this screen, and the screens that follow it, to identify the gateways
on this network. Use the fields and the function keys of this select
screen to perform the desired action as follows:
To identify a new gateway, specify the gateway name; then press the
[Add] function key. The path for the selected gateway name is added
to the configuration file, and the data screen on the path is
displayed. You may configure up to 14 gateways under an NI.
To modify an existing gateway configuration, specify the gateway
name; then press the
[Modify] function key. The data screen on the
path for the specified gateway is displayed.