NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

270 Chapter12
Gateway Half Network Interface Configuration Screens
Direct Connect Link Configuration
Fields Start device on
network
initialization
(Y/N) A Y (Yes) value means that the device is to be started
when a NETCONTROL START command is issued for the
network interface being configured. An N (No) means
that a NETCONTROL ADDLINK command must be used
to start the device.
Default value: Y
Range: Y or N
Enable idle
device timer
(Y/N) This field specifies whether the device is to be
disconnected automatically if no packets have been
received or transmitted over the link during a specified
time period. This field is relevant only if a timeout
value has been entered in the network interface screen
(see Related screens).
Related screens:
• NETXPORT.NI.
NIname
The idle device timeout value is configured on this
screen.
Default value: N
Range: Y or N