NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

158 Chapter7
X.25 Network Interface Configuration Screens
X.25 SVC Address Key Paths
POOL is the X.25 address key reserved for calls to and from nodes
whose addresses are not defined in this X.25 SVC Address Key Path
screen. When a POOL X.25 address key is used, any system, even one
that is not identified in this screen, can access this node. HP
recommends that you use the name portion of the formal node name
(name.domain.organization) as the X.25 address key. You can have a
maximum of 2048 address keys in the SVC path tables and 128 address
keys in the PVC path tables. If configuring multiple X.25 NI’s, no
address key can be used more than once per system. POOL can
also be used with level 3 programmatic access when specifying an X.25
address directly in a NetIPC call (for example, the IPCDEST call)
NOTE For DDN networks, the X.25 address is derived from the remote IP
address and you are not required to know the remote X.25 address.
Mapping is only required between the X.25 address key and the facility
set.
Fields X.25 address key
(Required.) The X.25 address key identifies a remote
node to which your node can establish a connection.
The address key can have up to eight alphanumeric
characters, the first of which must be alphabetic.
X.25 address
This is the X.25 address of the remote node for X.25
public data networks (PDN) or a private X.25 network.
The X.25 address can have up to 15 digits. The X.25
address will not be used if you configure a POOL
address key, or if you are configuring a link for a DDN
network.
Default: None.
Default facilities set name
The name of one of the facility sets you defined at the
User Facility Set screen. This set of facilities is
associated with the connections you have previously
defined. This field is required if you define an address
key.
Default: None