NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

18 Chapter1

Overview

Using the Command Window

The command window at the top of each NMMGR screen is used to

enter NMMGR or MPE commands. The command window is the third

line from the top of an NMMGR screen and has Command: on the

left-hand side.

You type a command in the command window and execute it by

pressing the

[Enter] key. The [Enter] key is the block mode enter key,

different from the carriage return key. The

[Enter] key is usually

marked

ENTER and the carriage return key is usually marked RETURN.

For more information about the command window, refer to Using the

Node Management Services (NMS) Utilities.